Troy Lee Designs D3 Fiberlite Helmet - Mono BlackThe ultimate bodyguard for your head when shredding the trail, Troy Lee Designs’ D3 Fiberlite Helmet offers outstanding protection without breaking the bank. Incorporating a host of race-derived features from the D3 Carbon and Composite, the Fiberlite is extremely lightweight and certainly packs a punch as you look to attack those tricky technical sections.A Signature HelmetIncredibly comfortable, well ventilated and designed for unrivalled aerodynamics, the D3 Fiberglass has taken on technology from its siblings to inspire your next ride with confidence. Crafted with a lightweight fibreglass shell, Troy Lee Designs have certainly ensured that performance isn’t compromised when focusing on protection. Having gone to great lengths to ensure the D3 is race ready, there are wind-tunnel proven aerodynamics and the efficient ventilation system works to maximise the flow of air around your head. Keeping you cool as your power transfers explode you into the berm, avoiding sweat and odours helps to maintain focus and comfort levels.Comfort in AbundanceIf the 20 high-flow intake ports and six exhausts weren’t enough, the padded interior liner is removable and washable for unrivalled freshness. High-end protection at an entry-level price, the D3 weighs in at just 1225 grams and offers an impressive fit thanks in no part to the specially-sized contoured 3D cheek pads. Should the unthinkable happen, the pads can be removed with a lever for an easy exit from the lid.Raising the standards of full-face helmets, the D3 really is a lid for the offroad warrior within. The race-style graphics ensure you stand out from the crowd while the signature design guarantees that the Fiberlite is finished to the highest of standards. ‘The most decorated helmet in professional racing’, the D3 Fiberlite is perfect for riders that crave the ultimate form of protection when shredding morning, noon and night. Features:Digital wind tunnel-tested, aerodynamic shell designRevolutionary injection-moulded air intake systemLightweight Fiberglass shell construction20 high-flow intake and exhaust ports for maximum ventilationAdded eps and new head form shape for improved impact performanceFull incremental sizing for greater range of fitmentDeep eps channelling for optimal airflowRemovable, washable padded liner with coolmax™ and dri-lex™ moisture wicking materialsContoured 3d cheek pads fit anatomicallyQuick-release cheek pads for emergency helmet removalPurpose-built internal cavities for audio integrationStainless steel chinstrap D-rings are light and strongIncludes TLD drawstring helmet sockExceeds bicycle certifications: ASTM F1952-15, ASTM F2032-15Not intended for use with motorised vehiclesBuy Troy Lee Designs from Chain Reaction Cycles, the World's Largest Online Bike Store.

Troy Lee Designs D3 Fiberlite Helmet - Mono BlackThe ultimate bodyguard for your head when shredding the trail, Troy Lee Designs’ D3 Fiberlite Helmet offers outstanding protection without breaking the bank. Incorporating a host of race-derived features from the D3 Carbon and Composite, the Fiberlite is extremely lightweight and certainly packs a punch as you look to attack those tricky technical sections.A Signature HelmetIncredibly comfortable, well ventilated and designed for unrivalled aerodynamics, the D3 Fiberglass has taken on technology from its siblings to inspire your next ride with confidence. Crafted with a lightweight fibreglass shell, Troy Lee Designs have certainly ensured that performance isn’t compromised when focusing on protection. Having gone to great lengths to ensure the D3 is race ready, there are wind-tunnel proven aerodynamics and the efficient ventilation system works to maximise the flow of air around your head. Keeping you cool as your power transfers explode you into the berm, avoiding sweat and odours helps to maintain focus and comfort levels.Comfort in AbundanceIf the 20 high-flow intake ports and six exhausts weren’t enough, the padded interior liner is removable and washable for unrivalled freshness. High-end protection at an entry-level price, the D3 weighs in at just 1225 grams and offers an impressive fit thanks in no part to the specially-sized contoured 3D cheek pads. Should the unthinkable happen, the pads can be removed with a lever for an easy exit from the lid.Raising the standards of full-face helmets, the D3 really is a lid for the offroad warrior within. The race-style graphics ensure you stand out from the crowd while the signature design guarantees that the Fiberlite is finished to the highest of standards. ‘The most decorated helmet in professional racing’, the D3 Fiberlite is perfect for riders that crave the ultimate form of protection when shredding morning, noon and night. Features:Digital wind tunnel-tested, aerodynamic shell designRevolutionary injection-moulded air intake systemLightweight Fiberglass shell construction20 high-flow intake and exhaust ports for maximum ventilationAdded eps and new head form shape for improved impact performanceFull incremental sizing for greater range of fitmentDeep eps channelling for optimal airflowRemovable, washable padded liner with coolmax™ and dri-lex™ moisture wicking materialsContoured 3d cheek pads fit anatomicallyQuick-release cheek pads for emergency helmet removalPurpose-built internal cavities for audio integrationStainless steel chinstrap D-rings are light and strongIncludes TLD drawstring helmet sockExceeds bicycle certifications: ASTM F1952-15, ASTM F2032-15Not intended for use with motorised vehiclesBuy Troy Lee Designs from Chain Reaction Cycles, the World's Largest Online Bike Store.

Troy Lee Designs D3 Fiberlite Helmet - Mono BlackThe ultimate bodyguard for your head when shredding the trail, Troy Lee Designs’ D3 Fiberlite Helmet offers outstanding protection without breaking the bank. Incorporating a host of race-derived features from the D3 Carbon and Composite, the Fiberlite is extremely lightweight and certainly packs a punch as you look to attack those tricky technical sections.A Signature HelmetIncredibly comfortable, well ventilated and designed for unrivalled aerodynamics, the D3 Fiberglass has taken on technology from its siblings to inspire your next ride with confidence. Crafted with a lightweight fibreglass shell, Troy Lee Designs have certainly ensured that performance isn’t compromised when focusing on protection. Having gone to great lengths to ensure the D3 is race ready, there are wind-tunnel proven aerodynamics and the efficient ventilation system works to maximise the flow of air around your head. Keeping you cool as your power transfers explode you into the berm, avoiding sweat and odours helps to maintain focus and comfort levels.Comfort in AbundanceIf the 20 high-flow intake ports and six exhausts weren’t enough, the padded interior liner is removable and washable for unrivalled freshness. High-end protection at an entry-level price, the D3 weighs in at just 1225 grams and offers an impressive fit thanks in no part to the specially-sized contoured 3D cheek pads. Should the unthinkable happen, the pads can be removed with a lever for an easy exit from the lid.Raising the standards of full-face helmets, the D3 really is a lid for the offroad warrior within. The race-style graphics ensure you stand out from the crowd while the signature design guarantees that the Fiberlite is finished to the highest of standards. ‘The most decorated helmet in professional racing’, the D3 Fiberlite is perfect for riders that crave the ultimate form of protection when shredding morning, noon and night. Features:Digital wind tunnel-tested, aerodynamic shell designRevolutionary injection-moulded air intake systemLightweight Fiberglass shell construction20 high-flow intake and exhaust ports for maximum ventilationAdded eps and new head form shape for improved impact performanceFull incremental sizing for greater range of fitmentDeep eps channelling for optimal airflowRemovable, washable padded liner with coolmax™ and dri-lex™ moisture wicking materialsContoured 3d cheek pads fit anatomicallyQuick-release cheek pads for emergency helmet removalPurpose-built internal cavities for audio integrationStainless steel chinstrap D-rings are light and strongIncludes TLD drawstring helmet sockExceeds bicycle certifications: ASTM F1952-15, ASTM F2032-15Not intended for use with motorised vehiclesBuy Troy Lee Designs from Chain Reaction Cycles, the World's Largest Online Bike Store.

6D ATR-2 Circuit HelmetWhether you love riding downhill, enduro or simply breathing in everything the trail has to offer the ATR-2 Circuit Helmet is the next level of brain protection to keep you protected throughout your session. A technical helmet jam-packed with safety features, 6D’s impressive creation is race proven and its extremely lightweight design lends itself to all-day comfort and unrivalled performance.Protection PersonifiedThe idea of offroad protection has now been redefined, and the ATR-2 Helmet has certainly set the benchmark for the rest of the competition. Infused with the outstanding ODS technology the ATR-2 is the most advanced energy management device ever and an Omni-Directional Suspension system ensures safety is the name of the game. Using elastomeric isolation dampers it reduces the transfer of the angular acceleration energy to the brain should you suffer an unexpected fall from the bike. Placed between two expanded EPS liners they compress and sheer upon impact to keep your head protected from the first pedal until the last.Ultralight PerformanceExtremely light, the ATR-2 is highly breathable and welcomes an incredible flow of air around your head to keep its pilots cool and fresh. Ensuring sweat and odours are avoided, the air gap ventilation system has an impressive 17 transfer ports (9 intake and 6 exhaust) to ensure exploding into berms doesn’t take its toll.  Providing the first line of defence against the beaten path, 6D’s EPS liner ensures that the ATR-2 has what some can consider a helmet inside a helmet. There are emergency quick-release cheek pads that can be removed easily and the PU-over molded EPP lined chin bar includes a sternum pad to make it one of the most protective helmets on the market.Unrivalled SafetyBoasting a large number of worldwide patents, the ATR-2 has a lightweight tri-composite shell that absorbs energy upon impacts. The rear lower shell incorporates compliant zones at the cervical spine location and a brow rib allows for integrity of the shell above your eye port. Ideal for shredding hard and kicking up roost, this stylish lid has a superior low, mid and high velocity impact mitigation and its rotational energy management disks work to reduce angular accelerations. Exceeding important MTB standards, the ATR-2 protects from roost thanks to the nose guard and the clavicle cut-away provides an increased clearance.Should you wish to add an extra level of protection to your ride you can shield your eyes from roost easily thanks to the goggle band integrated shell recess at the eye port. Improving the fit and seal of your googles, they maintain their positioning no matter how hard you pedal towards kickers.Thanks to unrivalled safety, high-end performance and a design so lightweight you’ll forget its even there, the ATR-2 Circuit Helmet is a must for offroad aficionados who love exploring the beaten path.Features - Helmet:Removable, washable comfort liner features Genuine Dri-Lex® anti-bacterial fabricEmergency Quick-Release Cheek PadsPU-over molded EPP lined chin bar includes Sternum PadGoggle band integrated shell recess at the eye port area improves goggle fit and sealShear-Away Visor Screws designed to reduce angular acceleration potentialNose guard provides improved roost protectionTitanium D-RingsLightweight with improved centre of gravity (+/- 1480 grams Size M)Exceeds DOT, ECE, ACU and ASTM Standards3-Year Limited WarrantyFeatures - Rebuildable ODS System:Patented Omni-Directional Suspension® (ODS®)Improved ODS design mitigates Angular and Linear AccelerationsReplaceable Inner EPS LinerMulti-impact EPP Outer Liner incorporates Isolation Damping TowersRotational Energy Management Disks reduce Angular AccelerationSuperior low, mid, and high velocity impact mitigationAir-Gap Ventilation System with 17 Transfer PortsFeatures - Shell:Optimised compliant lightweight Tri-Composite Shell provides superior energy absorption3 Shell Sizes optimize the size to weight ratioRear lower shell incorporates compliant zone at the cervical spine locationBrow Rib increases shell integrity above the eye portClavicle Cut-Away provides increased clearance9 Intake Ports and 6 Exhaust Ports work in unison with the Air Gap Ventilation SystemFeatures - Worldwide Patents:United States US 8,955,169 B2Europe EP 2 672 853 B1China ZL 201280017579.1Patents PendingBuy 6D from Chain Reaction Cycles, the World's Largest Online Bike Store.

6D ATR-2 Circuit HelmetWhether you love riding downhill, enduro or simply breathing in everything the trail has to offer the ATR-2 Circuit Helmet is the next level of brain protection to keep you protected throughout your session. A technical helmet jam-packed with safety features, 6D’s impressive creation is race proven and its extremely lightweight design lends itself to all-day comfort and unrivalled performance.Protection PersonifiedThe idea of offroad protection has now been redefined, and the ATR-2 Helmet has certainly set the benchmark for the rest of the competition. Infused with the outstanding ODS technology the ATR-2 is the most advanced energy management device ever and an Omni-Directional Suspension system ensures safety is the name of the game. Using elastomeric isolation dampers it reduces the transfer of the angular acceleration energy to the brain should you suffer an unexpected fall from the bike. Placed between two expanded EPS liners they compress and sheer upon impact to keep your head protected from the first pedal until the last.Ultralight PerformanceExtremely light, the ATR-2 is highly breathable and welcomes an incredible flow of air around your head to keep its pilots cool and fresh. Ensuring sweat and odours are avoided, the air gap ventilation system has an impressive 17 transfer ports (9 intake and 6 exhaust) to ensure exploding into berms doesn’t take its toll.  Providing the first line of defence against the beaten path, 6D’s EPS liner ensures that the ATR-2 has what some can consider a helmet inside a helmet. There are emergency quick-release cheek pads that can be removed easily and the PU-over molded EPP lined chin bar includes a sternum pad to make it one of the most protective helmets on the market.Unrivalled SafetyBoasting a large number of worldwide patents, the ATR-2 has a lightweight tri-composite shell that absorbs energy upon impacts. The rear lower shell incorporates compliant zones at the cervical spine location and a brow rib allows for integrity of the shell above your eye port. Ideal for shredding hard and kicking up roost, this stylish lid has a superior low, mid and high velocity impact mitigation and its rotational energy management disks work to reduce angular accelerations. Exceeding important MTB standards, the ATR-2 protects from roost thanks to the nose guard and the clavicle cut-away provides an increased clearance.Should you wish to add an extra level of protection to your ride you can shield your eyes from roost easily thanks to the goggle band integrated shell recess at the eye port. Improving the fit and seal of your googles, they maintain their positioning no matter how hard you pedal towards kickers.Thanks to unrivalled safety, high-end performance and a design so lightweight you’ll forget its even there, the ATR-2 Circuit Helmet is a must for offroad aficionados who love exploring the beaten path.Features - Helmet:Removable, washable comfort liner features Genuine Dri-Lex® anti-bacterial fabricEmergency Quick-Release Cheek PadsPU-over molded EPP lined chin bar includes Sternum PadGoggle band integrated shell recess at the eye port area improves goggle fit and sealShear-Away Visor Screws designed to reduce angular acceleration potentialNose guard provides improved roost protectionTitanium D-RingsLightweight with improved centre of gravity (+/- 1480 grams Size M)Exceeds DOT, ECE, ACU and ASTM Standards3-Year Limited WarrantyFeatures - Rebuildable ODS System:Patented Omni-Directional Suspension® (ODS®)Improved ODS design mitigates Angular and Linear AccelerationsReplaceable Inner EPS LinerMulti-impact EPP Outer Liner incorporates Isolation Damping TowersRotational Energy Management Disks reduce Angular AccelerationSuperior low, mid, and high velocity impact mitigationAir-Gap Ventilation System with 17 Transfer PortsFeatures - Shell:Optimised compliant lightweight Tri-Composite Shell provides superior energy absorption3 Shell Sizes optimize the size to weight ratioRear lower shell incorporates compliant zone at the cervical spine locationBrow Rib increases shell integrity above the eye portClavicle Cut-Away provides increased clearance9 Intake Ports and 6 Exhaust Ports work in unison with the Air Gap Ventilation SystemFeatures - Worldwide Patents:United States US 8,955,169 B2Europe EP 2 672 853 B1China ZL 201280017579.1Patents PendingBuy 6D from Chain Reaction Cycles, the World's Largest Online Bike Store.

Troy Lee Designs D3 Fiberlite Helmet - Mono BlackThe ultimate bodyguard for your head when shredding the trail, Troy Lee Designs’ D3 Fiberlite Helmet offers outstanding protection without breaking the bank. Incorporating a host of race-derived features from the D3 Carbon and Composite, the Fiberlite is extremely lightweight and certainly packs a punch as you look to attack those tricky technical sections.A Signature HelmetIncredibly comfortable, well ventilated and designed for unrivalled aerodynamics, the D3 Fiberglass has taken on technology from its siblings to inspire your next ride with confidence. Crafted with a lightweight fibreglass shell, Troy Lee Designs have certainly ensured that performance isn’t compromised when focusing on protection. Having gone to great lengths to ensure the D3 is race ready, there are wind-tunnel proven aerodynamics and the efficient ventilation system works to maximise the flow of air around your head. Keeping you cool as your power transfers explode you into the berm, avoiding sweat and odours helps to maintain focus and comfort levels.Comfort in AbundanceIf the 20 high-flow intake ports and six exhausts weren’t enough, the padded interior liner is removable and washable for unrivalled freshness. High-end protection at an entry-level price, the D3 weighs in at just 1225 grams and offers an impressive fit thanks in no part to the specially-sized contoured 3D cheek pads. Should the unthinkable happen, the pads can be removed with a lever for an easy exit from the lid.Raising the standards of full-face helmets, the D3 really is a lid for the offroad warrior within. The race-style graphics ensure you stand out from the crowd while the signature design guarantees that the Fiberlite is finished to the highest of standards. ‘The most decorated helmet in professional racing’, the D3 Fiberlite is perfect for riders that crave the ultimate form of protection when shredding morning, noon and night. Features:Digital wind tunnel-tested, aerodynamic shell designRevolutionary injection-moulded air intake systemLightweight Fiberglass shell construction20 high-flow intake and exhaust ports for maximum ventilationAdded eps and new head form shape for improved impact performanceFull incremental sizing for greater range of fitmentDeep eps channelling for optimal airflowRemovable, washable padded liner with coolmax™ and dri-lex™ moisture wicking materialsContoured 3d cheek pads fit anatomicallyQuick-release cheek pads for emergency helmet removalPurpose-built internal cavities for audio integrationStainless steel chinstrap D-rings are light and strongIncludes TLD drawstring helmet sockExceeds bicycle certifications: ASTM F1952-15, ASTM F2032-15Not intended for use with motorised vehiclesBuy Troy Lee Designs from Chain Reaction Cycles, the World's Largest Online Bike Store.

Troy Lee Designs D3 Fiberlite Helmet - Mono BlackThe ultimate bodyguard for your head when shredding the trail, Troy Lee Designs’ D3 Fiberlite Helmet offers outstanding protection without breaking the bank. Incorporating a host of race-derived features from the D3 Carbon and Composite, the Fiberlite is extremely lightweight and certainly packs a punch as you look to attack those tricky technical sections.A Signature HelmetIncredibly comfortable, well ventilated and designed for unrivalled aerodynamics, the D3 Fiberglass has taken on technology from its siblings to inspire your next ride with confidence. Crafted with a lightweight fibreglass shell, Troy Lee Designs have certainly ensured that performance isn’t compromised when focusing on protection. Having gone to great lengths to ensure the D3 is race ready, there are wind-tunnel proven aerodynamics and the efficient ventilation system works to maximise the flow of air around your head. Keeping you cool as your power transfers explode you into the berm, avoiding sweat and odours helps to maintain focus and comfort levels.Comfort in AbundanceIf the 20 high-flow intake ports and six exhausts weren’t enough, the padded interior liner is removable and washable for unrivalled freshness. High-end protection at an entry-level price, the D3 weighs in at just 1225 grams and offers an impressive fit thanks in no part to the specially-sized contoured 3D cheek pads. Should the unthinkable happen, the pads can be removed with a lever for an easy exit from the lid.Raising the standards of full-face helmets, the D3 really is a lid for the offroad warrior within. The race-style graphics ensure you stand out from the crowd while the signature design guarantees that the Fiberlite is finished to the highest of standards. ‘The most decorated helmet in professional racing’, the D3 Fiberlite is perfect for riders that crave the ultimate form of protection when shredding morning, noon and night. Features:Digital wind tunnel-tested, aerodynamic shell designRevolutionary injection-moulded air intake systemLightweight Fiberglass shell construction20 high-flow intake and exhaust ports for maximum ventilationAdded eps and new head form shape for improved impact performanceFull incremental sizing for greater range of fitmentDeep eps channelling for optimal airflowRemovable, washable padded liner with coolmax™ and dri-lex™ moisture wicking materialsContoured 3d cheek pads fit anatomicallyQuick-release cheek pads for emergency helmet removalPurpose-built internal cavities for audio integrationStainless steel chinstrap D-rings are light and strongIncludes TLD drawstring helmet sockExceeds bicycle certifications: ASTM F1952-15, ASTM F2032-15Not intended for use with motorised vehiclesBuy Troy Lee Designs from Chain Reaction Cycles, the World's Largest Online Bike Store.

Troy Lee Designs D3 Fiberlite Helmet - Mono BlackThe ultimate bodyguard for your head when shredding the trail, Troy Lee Designs’ D3 Fiberlite Helmet offers outstanding protection without breaking the bank. Incorporating a host of race-derived features from the D3 Carbon and Composite, the Fiberlite is extremely lightweight and certainly packs a punch as you look to attack those tricky technical sections.A Signature HelmetIncredibly comfortable, well ventilated and designed for unrivalled aerodynamics, the D3 Fiberglass has taken on technology from its siblings to inspire your next ride with confidence. Crafted with a lightweight fibreglass shell, Troy Lee Designs have certainly ensured that performance isn’t compromised when focusing on protection. Having gone to great lengths to ensure the D3 is race ready, there are wind-tunnel proven aerodynamics and the efficient ventilation system works to maximise the flow of air around your head. Keeping you cool as your power transfers explode you into the berm, avoiding sweat and odours helps to maintain focus and comfort levels.Comfort in AbundanceIf the 20 high-flow intake ports and six exhausts weren’t enough, the padded interior liner is removable and washable for unrivalled freshness. High-end protection at an entry-level price, the D3 weighs in at just 1225 grams and offers an impressive fit thanks in no part to the specially-sized contoured 3D cheek pads. Should the unthinkable happen, the pads can be removed with a lever for an easy exit from the lid.Raising the standards of full-face helmets, the D3 really is a lid for the offroad warrior within. The race-style graphics ensure you stand out from the crowd while the signature design guarantees that the Fiberlite is finished to the highest of standards. ‘The most decorated helmet in professional racing’, the D3 Fiberlite is perfect for riders that crave the ultimate form of protection when shredding morning, noon and night. Features:Digital wind tunnel-tested, aerodynamic shell designRevolutionary injection-moulded air intake systemLightweight Fiberglass shell construction20 high-flow intake and exhaust ports for maximum ventilationAdded eps and new head form shape for improved impact performanceFull incremental sizing for greater range of fitmentDeep eps channelling for optimal airflowRemovable, washable padded liner with coolmax™ and dri-lex™ moisture wicking materialsContoured 3d cheek pads fit anatomicallyQuick-release cheek pads for emergency helmet removalPurpose-built internal cavities for audio integrationStainless steel chinstrap D-rings are light and strongIncludes TLD drawstring helmet sockExceeds bicycle certifications: ASTM F1952-15, ASTM F2032-15Not intended for use with motorised vehiclesBuy Troy Lee Designs from Chain Reaction Cycles, the World's Largest Online Bike Store.

Smith Session MIPS HelmetSafety and style is the order of the day when pairing with the Session MIPS Helmet from Smith. An all-mountain lid destined to become a true offroad warrior, the Session is extremely breathable and makes shredding the beaten path an absolute joy to behold.Comfort Reigns SupremeLooking good is one thing but feeling the full force of the Session’s incredible comfort is another. Sporting a lightweight Aerocore in-mould construction and the VaporFit adjustable Fit System you can easily adapt the sitting of the helmet to your bonce. Should you ride aggressively, the Session uses an XT2 anti-bacterial performance lining to eliminate odours that also works in tandem with the outstanding ventilation ability the brand has introduced.Crafted with AirEvac Ventilation and an impressive 15 optimised vents there is no need to fear sweat and moisture when your cadence becomes explosive. The ventilated protection features the patented Koroyd material and the helmet maximises the flow of air around your head to leave you feeling fresh and focused when kicking up roost.The Ultimate Form Of ProtectionNow that comfort has been covered, it’s time to negotiate the rough and tumble of the trail. Whether attacking berms or negotiating tricky downsides, the Session MIPS Helmet offers outstanding coverage to the back of the head to up your protection game. Included with this outstanding lid is the innovative MIPS technology, used to reduce the rotational forces to the brain in the case of an oblique impact. Providing a small rotation of the outer shell relative to the liner, those forces are absorbed efficiently to keep you safe.The helmet has a three-position adjustable visor to deflect loam and there is also an ultra-light single layer webbing for added coverage. Should you still be questioning if the Venture is for you, Smith’s fascinating creation is CPSC, CE EN 1078 certified to give it that extra seal of approval.For those looking to add the finishing touch to the Session MIPS, Smith have created the ability to integrate a camera, light mount and sunglasses/goggles for the ultimate riding experience.What is MIPS?MIPS is a Brain Protection SystemRotational motion can cause brain injuriesThe low friction layer allows a sliding movement of 10–15 mm, in all directions, reducing rotational motion to the brain during impactMIPS adds protection Features:Lightweight Aerocore In-Mould ConstructionZonal ventilated protection featuring patented Koroyd materialIntegrated skeletal structureVaporFit Adjustable Fit System15 optimised ventsXT2 anti-bacterial performance liningUltra-light single layer webbingAirEvac VentilationUltimate sunglass and goggle integrationCertification: CPSC, CE EN 1078Camera & light mount compatibleThree-position adjustable visorWeight (Size M) 13.05 oz / 370 gramsBuy Smith from Chain Reaction Cycles, the World's Largest Online Bike Store.

Smith Forefront 2 MIPS HelmetPedal to the head of a new offroad revolution with the Forefront 2 Helmet from Smith. Destined to become a trail Hall of Fame nominee in no time, this stylish lid is full of technology and is designed to protect whether you’re exploring the sights or shredding downhill aggressively. The Forefront of MTB RidingSo good they’ve released it twice! The Forefront 2 Helmet is bursting at the seams with safety features to keep your head safe, with the integrated skeletal structure the standout authority. The Aerocore in-mold construction is incredibly lightweight to keep speeds high, also driving air down through your goggles to avoid heavy fogging. Incredibly breathable, sweat and odours are eliminated thanks to the 20 optimised vents and a reactive cooling performance liner that blows rival lids out of the water when it comes to keeping you cool.Incredible SafetyWhen it comes to protection, look no further than the Forefront 2 Helmet. Patented Koroyd material has been jam-packed into the design of the lid to absorb more from any unexpected impacts. Saving you from bumps and bruises, this material deforms on impact and also improves ventilation. For an easy customisation, riders can call upon the Vaporfit adjustable fit system and the ultra-light single webbing moulds around the head to add an extra layer of safety.For those that shred to post on social media, a camera and light mount can be easily mounted to the front of the helmet while the visor is adjusted with three easy steps to incorporate sunglasses or goggles. When your offroad adventures require a new form of protection ensure safety is at the Forefront of your mind with this outstanding trail lid.MIPS TechnologyEnsuring you stay protected throughout your session, this stylish lid has been infused with the revolutionary MIPS technology, a creation that lets the helmet slide relative to the head, adding more protection against rotational violence to the brain caused by angles impacts.What is MIPS? MIPS is a Brain Protection SystemRotational motion can cause brain injuriesThe low friction layer allows a sliding movement of 10–15 mm, in all directions, reducing rotational motion to the brain during impactMIPS adds protectionWhen your offroad adventures require a new form of protection ensure safety is at the Forefront of your mind with this outstanding trail lid.Features:Lightweight Aerocore™ In-Mold ConstructionMIPS TechnologyVentilated Protection Featuring Patented Koroyd MaterialIntegrated Skeletal Structure & 20 Optimised VentsVaporFit™ Adjustable Fit SystemX-Static with Reactive Cooling Performance LiningUltra-Light Single Layer WebbingAirEvac VentilationVisor adjustable in three stepsIntegrated camera and light mountSunglasses and goggle integrationBuy Smith from Chain Reaction Cycles, the World's Largest Online Bike Store.

Smith Forefront 2 MIPS HelmetPedal to the head of a new offroad revolution with the Forefront 2 Helmet from Smith. Destined to become a trail Hall of Fame nominee in no time, this stylish lid is full of technology and is designed to protect whether you’re exploring the sights or shredding downhill aggressively. The Forefront of MTB RidingSo good they’ve released it twice! The Forefront 2 Helmet is bursting at the seams with safety features to keep your head safe, with the integrated skeletal structure the standout authority. The Aerocore in-mold construction is incredibly lightweight to keep speeds high, also driving air down through your goggles to avoid heavy fogging. Incredibly breathable, sweat and odours are eliminated thanks to the 20 optimised vents and a reactive cooling performance liner that blows rival lids out of the water when it comes to keeping you cool.Incredible SafetyWhen it comes to protection, look no further than the Forefront 2 Helmet. Patented Koroyd material has been jam-packed into the design of the lid to absorb more from any unexpected impacts. Saving you from bumps and bruises, this material deforms on impact and also improves ventilation. For an easy customisation, riders can call upon the Vaporfit adjustable fit system and the ultra-light single webbing moulds around the head to add an extra layer of safety.For those that shred to post on social media, a camera and light mount can be easily mounted to the front of the helmet while the visor is adjusted with three easy steps to incorporate sunglasses or goggles. When your offroad adventures require a new form of protection ensure safety is at the Forefront of your mind with this outstanding trail lid.MIPS TechnologyEnsuring you stay protected throughout your session, this stylish lid has been infused with the revolutionary MIPS technology, a creation that lets the helmet slide relative to the head, adding more protection against rotational violence to the brain caused by angles impacts.What is MIPS? MIPS is a Brain Protection SystemRotational motion can cause brain injuriesThe low friction layer allows a sliding movement of 10–15 mm, in all directions, reducing rotational motion to the brain during impactMIPS adds protectionWhen your offroad adventures require a new form of protection ensure safety is at the Forefront of your mind with this outstanding trail lid.Features:Lightweight Aerocore™ In-Mold ConstructionMIPS TechnologyVentilated Protection Featuring Patented Koroyd MaterialIntegrated Skeletal Structure & 20 Optimised VentsVaporFit™ Adjustable Fit SystemX-Static with Reactive Cooling Performance LiningUltra-Light Single Layer WebbingAirEvac VentilationVisor adjustable in three stepsIntegrated camera and light mountSunglasses and goggle integrationBuy Smith from Chain Reaction Cycles, the World's Largest Online Bike Store.

Smith Forefront 2 MIPS HelmetPedal to the head of a new offroad revolution with the Forefront 2 Helmet from Smith. Destined to become a trail Hall of Fame nominee in no time, this stylish lid is full of technology and is designed to protect whether you’re exploring the sights or shredding downhill aggressively. The Forefront of MTB RidingSo good they’ve released it twice! The Forefront 2 Helmet is bursting at the seams with safety features to keep your head safe, with the integrated skeletal structure the standout authority. The Aerocore in-mold construction is incredibly lightweight to keep speeds high, also driving air down through your goggles to avoid heavy fogging. Incredibly breathable, sweat and odours are eliminated thanks to the 20 optimised vents and a reactive cooling performance liner that blows rival lids out of the water when it comes to keeping you cool.Incredible SafetyWhen it comes to protection, look no further than the Forefront 2 Helmet. Patented Koroyd material has been jam-packed into the design of the lid to absorb more from any unexpected impacts. Saving you from bumps and bruises, this material deforms on impact and also improves ventilation. For an easy customisation, riders can call upon the Vaporfit adjustable fit system and the ultra-light single webbing moulds around the head to add an extra layer of safety.For those that shred to post on social media, a camera and light mount can be easily mounted to the front of the helmet while the visor is adjusted with three easy steps to incorporate sunglasses or goggles. When your offroad adventures require a new form of protection ensure safety is at the Forefront of your mind with this outstanding trail lid.MIPS TechnologyEnsuring you stay protected throughout your session, this stylish lid has been infused with the revolutionary MIPS technology, a creation that lets the helmet slide relative to the head, adding more protection against rotational violence to the brain caused by angles impacts.What is MIPS? MIPS is a Brain Protection SystemRotational motion can cause brain injuriesThe low friction layer allows a sliding movement of 10–15 mm, in all directions, reducing rotational motion to the brain during impactMIPS adds protectionWhen your offroad adventures require a new form of protection ensure safety is at the Forefront of your mind with this outstanding trail lid.Features:Lightweight Aerocore™ In-Mold ConstructionMIPS TechnologyVentilated Protection Featuring Patented Koroyd MaterialIntegrated Skeletal Structure & 20 Optimised VentsVaporFit™ Adjustable Fit SystemX-Static with Reactive Cooling Performance LiningUltra-Light Single Layer WebbingAirEvac VentilationVisor adjustable in three stepsIntegrated camera and light mountSunglasses and goggle integrationBuy Smith from Chain Reaction Cycles, the World's Largest Online Bike Store.

Smith Forefront 2 MIPS HelmetPedal to the head of a new offroad revolution with the Forefront 2 Helmet from Smith. Destined to become a trail Hall of Fame nominee in no time, this stylish lid is full of technology and is designed to protect whether you’re exploring the sights or shredding downhill aggressively. The Forefront of MTB RidingSo good they’ve released it twice! The Forefront 2 Helmet is bursting at the seams with safety features to keep your head safe, with the integrated skeletal structure the standout authority. The Aerocore in-mold construction is incredibly lightweight to keep speeds high, also driving air down through your goggles to avoid heavy fogging. Incredibly breathable, sweat and odours are eliminated thanks to the 20 optimised vents and a reactive cooling performance liner that blows rival lids out of the water when it comes to keeping you cool.Incredible SafetyWhen it comes to protection, look no further than the Forefront 2 Helmet. Patented Koroyd material has been jam-packed into the design of the lid to absorb more from any unexpected impacts. Saving you from bumps and bruises, this material deforms on impact and also improves ventilation. For an easy customisation, riders can call upon the Vaporfit adjustable fit system and the ultra-light single webbing moulds around the head to add an extra layer of safety.For those that shred to post on social media, a camera and light mount can be easily mounted to the front of the helmet while the visor is adjusted with three easy steps to incorporate sunglasses or goggles. When your offroad adventures require a new form of protection ensure safety is at the Forefront of your mind with this outstanding trail lid.MIPS TechnologyEnsuring you stay protected throughout your session, this stylish lid has been infused with the revolutionary MIPS technology, a creation that lets the helmet slide relative to the head, adding more protection against rotational violence to the brain caused by angles impacts.What is MIPS? MIPS is a Brain Protection SystemRotational motion can cause brain injuriesThe low friction layer allows a sliding movement of 10–15 mm, in all directions, reducing rotational motion to the brain during impactMIPS adds protectionWhen your offroad adventures require a new form of protection ensure safety is at the Forefront of your mind with this outstanding trail lid.Features:Lightweight Aerocore™ In-Mold ConstructionMIPS TechnologyVentilated Protection Featuring Patented Koroyd MaterialIntegrated Skeletal Structure & 20 Optimised VentsVaporFit™ Adjustable Fit SystemX-Static with Reactive Cooling Performance LiningUltra-Light Single Layer WebbingAirEvac VentilationVisor adjustable in three stepsIntegrated camera and light mountSunglasses and goggle integrationBuy Smith from Chain Reaction Cycles, the World's Largest Online Bike Store.

Smith Forefront 2 MIPS HelmetPedal to the head of a new offroad revolution with the Forefront 2 Helmet from Smith. Destined to become a trail Hall of Fame nominee in no time, this stylish lid is full of technology and is designed to protect whether you’re exploring the sights or shredding downhill aggressively. The Forefront of MTB RidingSo good they’ve released it twice! The Forefront 2 Helmet is bursting at the seams with safety features to keep your head safe, with the integrated skeletal structure the standout authority. The Aerocore in-mold construction is incredibly lightweight to keep speeds high, also driving air down through your goggles to avoid heavy fogging. Incredibly breathable, sweat and odours are eliminated thanks to the 20 optimised vents and a reactive cooling performance liner that blows rival lids out of the water when it comes to keeping you cool.Incredible SafetyWhen it comes to protection, look no further than the Forefront 2 Helmet. Patented Koroyd material has been jam-packed into the design of the lid to absorb more from any unexpected impacts. Saving you from bumps and bruises, this material deforms on impact and also improves ventilation. For an easy customisation, riders can call upon the Vaporfit adjustable fit system and the ultra-light single webbing moulds around the head to add an extra layer of safety.For those that shred to post on social media, a camera and light mount can be easily mounted to the front of the helmet while the visor is adjusted with three easy steps to incorporate sunglasses or goggles. When your offroad adventures require a new form of protection ensure safety is at the Forefront of your mind with this outstanding trail lid.MIPS TechnologyEnsuring you stay protected throughout your session, this stylish lid has been infused with the revolutionary MIPS technology, a creation that lets the helmet slide relative to the head, adding more protection against rotational violence to the brain caused by angles impacts.What is MIPS? MIPS is a Brain Protection SystemRotational motion can cause brain injuriesThe low friction layer allows a sliding movement of 10–15 mm, in all directions, reducing rotational motion to the brain during impactMIPS adds protectionWhen your offroad adventures require a new form of protection ensure safety is at the Forefront of your mind with this outstanding trail lid.Features:Lightweight Aerocore™ In-Mold ConstructionMIPS TechnologyVentilated Protection Featuring Patented Koroyd MaterialIntegrated Skeletal Structure & 20 Optimised VentsVaporFit™ Adjustable Fit SystemX-Static with Reactive Cooling Performance LiningUltra-Light Single Layer WebbingAirEvac VentilationVisor adjustable in three stepsIntegrated camera and light mountSunglasses and goggle integrationBuy Smith from Chain Reaction Cycles, the World's Largest Online Bike Store.

Smith Forefront 2 MIPS HelmetPedal to the head of a new offroad revolution with the Forefront 2 Helmet from Smith. Destined to become a trail Hall of Fame nominee in no time, this stylish lid is full of technology and is designed to protect whether you’re exploring the sights or shredding downhill aggressively. The Forefront of MTB RidingSo good they’ve released it twice! The Forefront 2 Helmet is bursting at the seams with safety features to keep your head safe, with the integrated skeletal structure the standout authority. The Aerocore in-mold construction is incredibly lightweight to keep speeds high, also driving air down through your goggles to avoid heavy fogging. Incredibly breathable, sweat and odours are eliminated thanks to the 20 optimised vents and a reactive cooling performance liner that blows rival lids out of the water when it comes to keeping you cool.Incredible SafetyWhen it comes to protection, look no further than the Forefront 2 Helmet. Patented Koroyd material has been jam-packed into the design of the lid to absorb more from any unexpected impacts. Saving you from bumps and bruises, this material deforms on impact and also improves ventilation. For an easy customisation, riders can call upon the Vaporfit adjustable fit system and the ultra-light single webbing moulds around the head to add an extra layer of safety.For those that shred to post on social media, a camera and light mount can be easily mounted to the front of the helmet while the visor is adjusted with three easy steps to incorporate sunglasses or goggles. When your offroad adventures require a new form of protection ensure safety is at the Forefront of your mind with this outstanding trail lid.MIPS TechnologyEnsuring you stay protected throughout your session, this stylish lid has been infused with the revolutionary MIPS technology, a creation that lets the helmet slide relative to the head, adding more protection against rotational violence to the brain caused by angles impacts.What is MIPS? MIPS is a Brain Protection SystemRotational motion can cause brain injuriesThe low friction layer allows a sliding movement of 10–15 mm, in all directions, reducing rotational motion to the brain during impactMIPS adds protectionWhen your offroad adventures require a new form of protection ensure safety is at the Forefront of your mind with this outstanding trail lid.Features:Lightweight Aerocore™ In-Mold ConstructionMIPS TechnologyVentilated Protection Featuring Patented Koroyd MaterialIntegrated Skeletal Structure & 20 Optimised VentsVaporFit™ Adjustable Fit SystemX-Static with Reactive Cooling Performance LiningUltra-Light Single Layer WebbingAirEvac VentilationVisor adjustable in three stepsIntegrated camera and light mountSunglasses and goggle integrationBuy Smith from Chain Reaction Cycles, the World's Largest Online Bike Store.

Smith Forefront 2 MIPS HelmetPedal to the head of a new offroad revolution with the Forefront 2 Helmet from Smith. Destined to become a trail Hall of Fame nominee in no time, this stylish lid is full of technology and is designed to protect whether you’re exploring the sights or shredding downhill aggressively. The Forefront of MTB RidingSo good they’ve released it twice! The Forefront 2 Helmet is bursting at the seams with safety features to keep your head safe, with the integrated skeletal structure the standout authority. The Aerocore in-mold construction is incredibly lightweight to keep speeds high, also driving air down through your goggles to avoid heavy fogging. Incredibly breathable, sweat and odours are eliminated thanks to the 20 optimised vents and a reactive cooling performance liner that blows rival lids out of the water when it comes to keeping you cool.Incredible SafetyWhen it comes to protection, look no further than the Forefront 2 Helmet. Patented Koroyd material has been jam-packed into the design of the lid to absorb more from any unexpected impacts. Saving you from bumps and bruises, this material deforms on impact and also improves ventilation. For an easy customisation, riders can call upon the Vaporfit adjustable fit system and the ultra-light single webbing moulds around the head to add an extra layer of safety.For those that shred to post on social media, a camera and light mount can be easily mounted to the front of the helmet while the visor is adjusted with three easy steps to incorporate sunglasses or goggles. When your offroad adventures require a new form of protection ensure safety is at the Forefront of your mind with this outstanding trail lid.MIPS TechnologyEnsuring you stay protected throughout your session, this stylish lid has been infused with the revolutionary MIPS technology, a creation that lets the helmet slide relative to the head, adding more protection against rotational violence to the brain caused by angles impacts.What is MIPS? MIPS is a Brain Protection SystemRotational motion can cause brain injuriesThe low friction layer allows a sliding movement of 10–15 mm, in all directions, reducing rotational motion to the brain during impactMIPS adds protectionWhen your offroad adventures require a new form of protection ensure safety is at the Forefront of your mind with this outstanding trail lid.Features:Lightweight Aerocore™ In-Mold ConstructionMIPS TechnologyVentilated Protection Featuring Patented Koroyd MaterialIntegrated Skeletal Structure & 20 Optimised VentsVaporFit™ Adjustable Fit SystemX-Static with Reactive Cooling Performance LiningUltra-Light Single Layer WebbingAirEvac VentilationVisor adjustable in three stepsIntegrated camera and light mountSunglasses and goggle integrationBuy Smith from Chain Reaction Cycles, the World's Largest Online Bike Store.

Smith Forefront 2 MIPS HelmetPedal to the head of a new offroad revolution with the Forefront 2 Helmet from Smith. Destined to become a trail Hall of Fame nominee in no time, this stylish lid is full of technology and is designed to protect whether you’re exploring the sights or shredding downhill aggressively. The Forefront of MTB RidingSo good they’ve released it twice! The Forefront 2 Helmet is bursting at the seams with safety features to keep your head safe, with the integrated skeletal structure the standout authority. The Aerocore in-mold construction is incredibly lightweight to keep speeds high, also driving air down through your goggles to avoid heavy fogging. Incredibly breathable, sweat and odours are eliminated thanks to the 20 optimised vents and a reactive cooling performance liner that blows rival lids out of the water when it comes to keeping you cool.Incredible SafetyWhen it comes to protection, look no further than the Forefront 2 Helmet. Patented Koroyd material has been jam-packed into the design of the lid to absorb more from any unexpected impacts. Saving you from bumps and bruises, this material deforms on impact and also improves ventilation. For an easy customisation, riders can call upon the Vaporfit adjustable fit system and the ultra-light single webbing moulds around the head to add an extra layer of safety.For those that shred to post on social media, a camera and light mount can be easily mounted to the front of the helmet while the visor is adjusted with three easy steps to incorporate sunglasses or goggles. When your offroad adventures require a new form of protection ensure safety is at the Forefront of your mind with this outstanding trail lid.MIPS TechnologyEnsuring you stay protected throughout your session, this stylish lid has been infused with the revolutionary MIPS technology, a creation that lets the helmet slide relative to the head, adding more protection against rotational violence to the brain caused by angles impacts.What is MIPS? MIPS is a Brain Protection SystemRotational motion can cause brain injuriesThe low friction layer allows a sliding movement of 10–15 mm, in all directions, reducing rotational motion to the brain during impactMIPS adds protectionWhen your offroad adventures require a new form of protection ensure safety is at the Forefront of your mind with this outstanding trail lid.Features:Lightweight Aerocore™ In-Mold ConstructionMIPS TechnologyVentilated Protection Featuring Patented Koroyd MaterialIntegrated Skeletal Structure & 20 Optimised VentsVaporFit™ Adjustable Fit SystemX-Static with Reactive Cooling Performance LiningUltra-Light Single Layer WebbingAirEvac VentilationVisor adjustable in three stepsIntegrated camera and light mountSunglasses and goggle integrationBuy Smith from Chain Reaction Cycles, the World's Largest Online Bike Store.

Smith Forefront 2 MIPS HelmetPedal to the head of a new offroad revolution with the Forefront 2 Helmet from Smith. Destined to become a trail Hall of Fame nominee in no time, this stylish lid is full of technology and is designed to protect whether you’re exploring the sights or shredding downhill aggressively. The Forefront of MTB RidingSo good they’ve released it twice! The Forefront 2 Helmet is bursting at the seams with safety features to keep your head safe, with the integrated skeletal structure the standout authority. The Aerocore in-mold construction is incredibly lightweight to keep speeds high, also driving air down through your goggles to avoid heavy fogging. Incredibly breathable, sweat and odours are eliminated thanks to the 20 optimised vents and a reactive cooling performance liner that blows rival lids out of the water when it comes to keeping you cool.Incredible SafetyWhen it comes to protection, look no further than the Forefront 2 Helmet. Patented Koroyd material has been jam-packed into the design of the lid to absorb more from any unexpected impacts. Saving you from bumps and bruises, this material deforms on impact and also improves ventilation. For an easy customisation, riders can call upon the Vaporfit adjustable fit system and the ultra-light single webbing moulds around the head to add an extra layer of safety.For those that shred to post on social media, a camera and light mount can be easily mounted to the front of the helmet while the visor is adjusted with three easy steps to incorporate sunglasses or goggles. When your offroad adventures require a new form of protection ensure safety is at the Forefront of your mind with this outstanding trail lid.MIPS TechnologyEnsuring you stay protected throughout your session, this stylish lid has been infused with the revolutionary MIPS technology, a creation that lets the helmet slide relative to the head, adding more protection against rotational violence to the brain caused by angles impacts.What is MIPS? MIPS is a Brain Protection SystemRotational motion can cause brain injuriesThe low friction layer allows a sliding movement of 10–15 mm, in all directions, reducing rotational motion to the brain during impactMIPS adds protectionWhen your offroad adventures require a new form of protection ensure safety is at the Forefront of your mind with this outstanding trail lid.Features:Lightweight Aerocore™ In-Mold ConstructionMIPS TechnologyVentilated Protection Featuring Patented Koroyd MaterialIntegrated Skeletal Structure & 20 Optimised VentsVaporFit™ Adjustable Fit SystemX-Static with Reactive Cooling Performance LiningUltra-Light Single Layer WebbingAirEvac VentilationVisor adjustable in three stepsIntegrated camera and light mountSunglasses and goggle integrationBuy Smith from Chain Reaction Cycles, the World's Largest Online Bike Store.

Smith Forefront 2 MIPS HelmetPedal to the head of a new offroad revolution with the Forefront 2 Helmet from Smith. Destined to become a trail Hall of Fame nominee in no time, this stylish lid is full of technology and is designed to protect whether you’re exploring the sights or shredding downhill aggressively. The Forefront of MTB RidingSo good they’ve released it twice! The Forefront 2 Helmet is bursting at the seams with safety features to keep your head safe, with the integrated skeletal structure the standout authority. The Aerocore in-mold construction is incredibly lightweight to keep speeds high, also driving air down through your goggles to avoid heavy fogging. Incredibly breathable, sweat and odours are eliminated thanks to the 20 optimised vents and a reactive cooling performance liner that blows rival lids out of the water when it comes to keeping you cool.Incredible SafetyWhen it comes to protection, look no further than the Forefront 2 Helmet. Patented Koroyd material has been jam-packed into the design of the lid to absorb more from any unexpected impacts. Saving you from bumps and bruises, this material deforms on impact and also improves ventilation. For an easy customisation, riders can call upon the Vaporfit adjustable fit system and the ultra-light single webbing moulds around the head to add an extra layer of safety.For those that shred to post on social media, a camera and light mount can be easily mounted to the front of the helmet while the visor is adjusted with three easy steps to incorporate sunglasses or goggles. When your offroad adventures require a new form of protection ensure safety is at the Forefront of your mind with this outstanding trail lid.MIPS TechnologyEnsuring you stay protected throughout your session, this stylish lid has been infused with the revolutionary MIPS technology, a creation that lets the helmet slide relative to the head, adding more protection against rotational violence to the brain caused by angles impacts.What is MIPS? MIPS is a Brain Protection SystemRotational motion can cause brain injuriesThe low friction layer allows a sliding movement of 10–15 mm, in all directions, reducing rotational motion to the brain during impactMIPS adds protectionWhen your offroad adventures require a new form of protection ensure safety is at the Forefront of your mind with this outstanding trail lid.Features:Lightweight Aerocore™ In-Mold ConstructionMIPS TechnologyVentilated Protection Featuring Patented Koroyd MaterialIntegrated Skeletal Structure & 20 Optimised VentsVaporFit™ Adjustable Fit SystemX-Static with Reactive Cooling Performance LiningUltra-Light Single Layer WebbingAirEvac VentilationVisor adjustable in three stepsIntegrated camera and light mountSunglasses and goggle integrationBuy Smith from Chain Reaction Cycles, the World's Largest Online Bike Store.

Smith Network MIPS HelmetGet out on the road and usher in a clean, modern new dawn with the Network MIPS Helmet from Smith. Striking the perfect balance between style and performance, this highly protective lid is ideal for racking up the miles regardless of whether you cycle socially or competitively.The King of ComfortLooking good is one thing but feeling the full force of the Network's incredible comfort is another. Sporting a lightweight Aerocore in-mould construction and the VaporFit adjustable Fit System you can easily adapt the sitting of the helmet to your bonce. Should your cadence become aggressive the Network uses an XT2 anti-bacterial performance lining to eliminate odours, working in tandem with the outstanding ventilation ability Smith have introduced.Crafted with AirEvac Ventilation and an impressive 20 optimised vents there is no need to fear sweat and moisture as you look to break up the road. The ventilated protection features the patented Koroyd material and the helmet maximises the flow of air around your head to leave you feeling fresh and focused ahead of a big sprint finish.Unrivalled ProtectionNow that comfort has been covered, it’s time to negotiate breaking away from the peloton. When upping the ante, the Network MIPS Helmet offers outstanding coverage to the back of the head that maximises your protection. Included with this outstanding lid is the innovative MIPS technology, used to reduce the rotational forces to the brain in the case of an oblique impact. If riding casually, the variety on offer from the Network Helmet allows for it to be ridden over gravel trails.The helmet has an adjustable visor to deflect loam and there is also an ultra-light single layer webbing for added coverage. Should you still be questioning if the Network is for you, Smith’s fascinating creation is CPSC, CE EN 1078 certified to give it that extra seal of approval.For those looking to add the finishing touch to the Network MIPS Smith have created the ability to integrate a camera, light mount or sunglasses for the ultimate riding experience.What is MIPS? MIPS is a Brain Protection SystemRotational motion can cause brain injuriesThe low friction layer allows a sliding movement of 10–15 mm, in all directions, reducing rotational motion to the brain during impactMIPS adds protectionFeatures:Lightweight Aerocore In-Mould ConstructionVentilated protection featuring patented Koroyd materialMIPS system available in all coloursVaporFit Adjustable Fit System20 optimised ventsXT2 anti-bacterial performance liningUltra-light single layer webbingAirEvac VentilationIntegrated camera & light mountUltimate sunglass integrationWeight (Size M) 10.58 oz / 300 gramsCertification: CPSC, CE EN 1078Adjustable/removable visorBuy Smith from Chain Reaction Cycles, the World's Largest Online Bike Store.