Bell Super Air R Full Face HelmetThe Bell Super Air R Full Face Helmet is their most advanced mountain bike helmet to date. It's also the most versatile. FLEX Spherical + MIPS® protection and a removable chinbar offer incredible protection and comfort, perfect for the climbs and the gnarliest of downs.Easily adapted to take on any trail, from a tough technical climb to flowing singletrack to super steep and rocky chutes, the Bell Super Air R Full Face Helmet can do it all. With two clicks the chinbar can be removed and stowed in a backpack, giving the extra airflow of an open face lid on the ride to the trailhead. When the downhill beckons clip it back on for full-face protection. Quick. Simple. Awesome. When it comes to protection in the event of a crash, the Super Air R has a number of features to keep you safe and let you get up and keep riding. It starts with the Fusion In-Mould design, pioneered by Bell. A tough polycarbonate outer shell is bonded directly to a multi-density energy-absorbing EPS (Expanded Polystyrene) inner, dissipating the forces involved when your head hits the dirt. Next comes the FLEX Spherical + MIPS® system. FLEX Spherical + MIPS® ((Multi-directional Impact Protection System)The FLEX Spherical + MIPS® is the latest generation of slip-plane protection, designed to minimise the rotational forces placed on the head in the event of a crash. In doing so brain injuries are minimised. The FLEX Spherical + MIPS® has been created to address both high-speed and low-speed impacts while simultaneously dealing with rotational forces and at the same time it allows for better helmet ventilation too.What is MIPS?• MIPS is a Brain Protection System• Rotational motion can cause brain injuries• The low friction layer allows a sliding movement of 10–15 mm, in all directions, reducing rotational motion to the brain during impact• MIPS adds protectionCool and Fresh When You're in the FlowWhen you're in the zone and flowing down trails you're going to build up a  sweat. However, fear not the Super Air R won't let you overheat. 18 vents and the Overbrow Ventilation work with the carefully designed inner airflow channel matrix to keep fresh, cooling air whooshing over your scalp. Sweat Guide padding draws moisture away from the skin for dry comfort while X-static padding, woven with silver fibres to inhibit the growth of odour-causing bacteria and fungi, ensure you'll never suffer an itchy-scalp after a great session of mountain biking. Features:Fusion In-Mould Polycarbonate ShellProgressive Layering18 helmet vents, 8 chin bar vents, 4 brow portsWraparound Chin Bar - 2-click removableGoggleGuide™ Adjustable VisorIntegrated Breakaway Camera MountSweat Guide paddingX-Static® PaddingFLEX Spherical + MIPS®Buy Bell Helmets from Chain Reaction Cycles. The World's Largest Online Bike Store.

Bell Super Air R Full Face HelmetThe Bell Super Air R Full Face Helmet is their most advanced mountain bike helmet to date. It's also the most versatile. FLEX Spherical + MIPS® protection and a removable chinbar offer incredible protection and comfort, perfect for the climbs and the gnarliest of downs.Easily adapted to take on any trail, from a tough technical climb to flowing singletrack to super steep and rocky chutes, the Bell Super Air R Full Face Helmet can do it all. With two clicks the chinbar can be removed and stowed in a backpack, giving the extra airflow of an open face lid on the ride to the trailhead. When the downhill beckons clip it back on for full-face protection. Quick. Simple. Awesome. When it comes to protection in the event of a crash, the Super Air R has a number of features to keep you safe and let you get up and keep riding. It starts with the Fusion In-Mould design, pioneered by Bell. A tough polycarbonate outer shell is bonded directly to a multi-density energy-absorbing EPS (Expanded Polystyrene) inner, dissipating the forces involved when your head hits the dirt. Next comes the FLEX Spherical + MIPS® system. FLEX Spherical + MIPS® ((Multi-directional Impact Protection System)The FLEX Spherical + MIPS® is the latest generation of slip-plane protection, designed to minimise the rotational forces placed on the head in the event of a crash. In doing so brain injuries are minimised. The FLEX Spherical + MIPS® has been created to address both high-speed and low-speed impacts while simultaneously dealing with rotational forces and at the same time it allows for better helmet ventilation too.What is MIPS?• MIPS is a Brain Protection System• Rotational motion can cause brain injuries• The low friction layer allows a sliding movement of 10–15 mm, in all directions, reducing rotational motion to the brain during impact• MIPS adds protectionCool and Fresh When You're in the FlowWhen you're in the zone and flowing down trails you're going to build up a  sweat. However, fear not the Super Air R won't let you overheat. 18 vents and the Overbrow Ventilation work with the carefully designed inner airflow channel matrix to keep fresh, cooling air whooshing over your scalp. Sweat Guide padding draws moisture away from the skin for dry comfort while X-static padding, woven with silver fibres to inhibit the growth of odour-causing bacteria and fungi, ensure you'll never suffer an itchy-scalp after a great session of mountain biking. Features:Fusion In-Mould Polycarbonate ShellProgressive Layering18 helmet vents, 8 chin bar vents, 4 brow portsWraparound Chin Bar - 2-click removableGoggleGuide™ Adjustable VisorIntegrated Breakaway Camera MountSweat Guide paddingX-Static® PaddingFLEX Spherical + MIPS®Buy Bell Helmets from Chain Reaction Cycles. The World's Largest Online Bike Store.

Bell Super Air R Full Face HelmetThe Bell Super Air R Full Face Helmet is their most advanced mountain bike helmet to date. It's also the most versatile. FLEX Spherical + MIPS® protection and a removable chinbar offer incredible protection and comfort, perfect for the climbs and the gnarliest of downs.Easily adapted to take on any trail, from a tough technical climb to flowing singletrack to super steep and rocky chutes, the Bell Super Air R Full Face Helmet can do it all. With two clicks the chinbar can be removed and stowed in a backpack, giving the extra airflow of an open face lid on the ride to the trailhead. When the downhill beckons clip it back on for full-face protection. Quick. Simple. Awesome. When it comes to protection in the event of a crash, the Super Air R has a number of features to keep you safe and let you get up and keep riding. It starts with the Fusion In-Mould design, pioneered by Bell. A tough polycarbonate outer shell is bonded directly to a multi-density energy-absorbing EPS (Expanded Polystyrene) inner, dissipating the forces involved when your head hits the dirt. Next comes the FLEX Spherical + MIPS® system. FLEX Spherical + MIPS® ((Multi-directional Impact Protection System)The FLEX Spherical + MIPS® is the latest generation of slip-plane protection, designed to minimise the rotational forces placed on the head in the event of a crash. In doing so brain injuries are minimised. The FLEX Spherical + MIPS® has been created to address both high-speed and low-speed impacts while simultaneously dealing with rotational forces and at the same time it allows for better helmet ventilation too.What is MIPS?• MIPS is a Brain Protection System• Rotational motion can cause brain injuries• The low friction layer allows a sliding movement of 10–15 mm, in all directions, reducing rotational motion to the brain during impact• MIPS adds protectionCool and Fresh When You're in the FlowWhen you're in the zone and flowing down trails you're going to build up a  sweat. However, fear not the Super Air R won't let you overheat. 18 vents and the Overbrow Ventilation work with the carefully designed inner airflow channel matrix to keep fresh, cooling air whooshing over your scalp. Sweat Guide padding draws moisture away from the skin for dry comfort while X-static padding, woven with silver fibres to inhibit the growth of odour-causing bacteria and fungi, ensure you'll never suffer an itchy-scalp after a great session of mountain biking. Features:Fusion In-Mould Polycarbonate ShellProgressive Layering18 helmet vents, 8 chin bar vents, 4 brow portsWraparound Chin Bar - 2-click removableGoggleGuide™ Adjustable VisorIntegrated Breakaway Camera MountSweat Guide paddingX-Static® PaddingFLEX Spherical + MIPS®Buy Bell Helmets from Chain Reaction Cycles. The World's Largest Online Bike Store.

Bell Super Air R Full Face HelmetThe Bell Super Air R Full Face Helmet is their most advanced mountain bike helmet to date. It's also the most versatile. FLEX Spherical + MIPS® protection and a removable chinbar offer incredible protection and comfort, perfect for the climbs and the gnarliest of downs.Easily adapted to take on any trail, from a tough technical climb to flowing singletrack to super steep and rocky chutes, the Bell Super Air R Full Face Helmet can do it all. With two clicks the chinbar can be removed and stowed in a backpack, giving the extra airflow of an open face lid on the ride to the trailhead. When the downhill beckons clip it back on for full-face protection. Quick. Simple. Awesome. When it comes to protection in the event of a crash, the Super Air R has a number of features to keep you safe and let you get up and keep riding. It starts with the Fusion In-Mould design, pioneered by Bell. A tough polycarbonate outer shell is bonded directly to a multi-density energy-absorbing EPS (Expanded Polystyrene) inner, dissipating the forces involved when your head hits the dirt. Next comes the FLEX Spherical + MIPS® system. FLEX Spherical + MIPS® ((Multi-directional Impact Protection System)The FLEX Spherical + MIPS® is the latest generation of slip-plane protection, designed to minimise the rotational forces placed on the head in the event of a crash. In doing so brain injuries are minimised. The FLEX Spherical + MIPS® has been created to address both high-speed and low-speed impacts while simultaneously dealing with rotational forces and at the same time it allows for better helmet ventilation too.What is MIPS?• MIPS is a Brain Protection System• Rotational motion can cause brain injuries• The low friction layer allows a sliding movement of 10–15 mm, in all directions, reducing rotational motion to the brain during impact• MIPS adds protectionCool and Fresh When You're in the FlowWhen you're in the zone and flowing down trails you're going to build up a  sweat. However, fear not the Super Air R won't let you overheat. 18 vents and the Overbrow Ventilation work with the carefully designed inner airflow channel matrix to keep fresh, cooling air whooshing over your scalp. Sweat Guide padding draws moisture away from the skin for dry comfort while X-static padding, woven with silver fibres to inhibit the growth of odour-causing bacteria and fungi, ensure you'll never suffer an itchy-scalp after a great session of mountain biking. Features:Fusion In-Mould Polycarbonate ShellProgressive Layering18 helmet vents, 8 chin bar vents, 4 brow portsWraparound Chin Bar - 2-click removableGoggleGuide™ Adjustable VisorIntegrated Breakaway Camera MountSweat Guide paddingX-Static® PaddingFLEX Spherical + MIPS®Buy Bell Helmets from Chain Reaction Cycles. The World's Largest Online Bike Store.

Bell Super Air R Full Face HelmetThe Bell Super Air R Full Face Helmet is their most advanced mountain bike helmet to date. It's also the most versatile. FLEX Spherical + MIPS® protection and a removable chinbar offer incredible protection and comfort, perfect for the climbs and the gnarliest of downs.Easily adapted to take on any trail, from a tough technical climb to flowing singletrack to super steep and rocky chutes, the Bell Super Air R Full Face Helmet can do it all. With two clicks the chinbar can be removed and stowed in a backpack, giving the extra airflow of an open face lid on the ride to the trailhead. When the downhill beckons clip it back on for full-face protection. Quick. Simple. Awesome. When it comes to protection in the event of a crash, the Super Air R has a number of features to keep you safe and let you get up and keep riding. It starts with the Fusion In-Mould design, pioneered by Bell. A tough polycarbonate outer shell is bonded directly to a multi-density energy-absorbing EPS (Expanded Polystyrene) inner, dissipating the forces involved when your head hits the dirt. Next comes the FLEX Spherical + MIPS® system. FLEX Spherical + MIPS® ((Multi-directional Impact Protection System)The FLEX Spherical + MIPS® is the latest generation of slip-plane protection, designed to minimise the rotational forces placed on the head in the event of a crash. In doing so brain injuries are minimised. The FLEX Spherical + MIPS® has been created to address both high-speed and low-speed impacts while simultaneously dealing with rotational forces and at the same time it allows for better helmet ventilation too.What is MIPS?• MIPS is a Brain Protection System• Rotational motion can cause brain injuries• The low friction layer allows a sliding movement of 10–15 mm, in all directions, reducing rotational motion to the brain during impact• MIPS adds protectionCool and Fresh When You're in the FlowWhen you're in the zone and flowing down trails you're going to build up a  sweat. However, fear not the Super Air R won't let you overheat. 18 vents and the Overbrow Ventilation work with the carefully designed inner airflow channel matrix to keep fresh, cooling air whooshing over your scalp. Sweat Guide padding draws moisture away from the skin for dry comfort while X-static padding, woven with silver fibres to inhibit the growth of odour-causing bacteria and fungi, ensure you'll never suffer an itchy-scalp after a great session of mountain biking. Features:Fusion In-Mould Polycarbonate ShellProgressive Layering18 helmet vents, 8 chin bar vents, 4 brow portsWraparound Chin Bar - 2-click removableGoggleGuide™ Adjustable VisorIntegrated Breakaway Camera MountSweat Guide paddingX-Static® PaddingFLEX Spherical + MIPS®Buy Bell Helmets from Chain Reaction Cycles. The World's Largest Online Bike Store.

Bell Super Air R Full Face HelmetThe Bell Super Air R Full Face Helmet is their most advanced mountain bike helmet to date. It's also the most versatile. FLEX Spherical + MIPS® protection and a removable chinbar offer incredible protection and comfort, perfect for the climbs and the gnarliest of downs.Easily adapted to take on any trail, from a tough technical climb to flowing singletrack to super steep and rocky chutes, the Bell Super Air R Full Face Helmet can do it all. With two clicks the chinbar can be removed and stowed in a backpack, giving the extra airflow of an open face lid on the ride to the trailhead. When the downhill beckons clip it back on for full-face protection. Quick. Simple. Awesome. When it comes to protection in the event of a crash, the Super Air R has a number of features to keep you safe and let you get up and keep riding. It starts with the Fusion In-Mould design, pioneered by Bell. A tough polycarbonate outer shell is bonded directly to a multi-density energy-absorbing EPS (Expanded Polystyrene) inner, dissipating the forces involved when your head hits the dirt. Next comes the FLEX Spherical + MIPS® system. FLEX Spherical + MIPS® ((Multi-directional Impact Protection System)The FLEX Spherical + MIPS® is the latest generation of slip-plane protection, designed to minimise the rotational forces placed on the head in the event of a crash. In doing so brain injuries are minimised. The FLEX Spherical + MIPS® has been created to address both high-speed and low-speed impacts while simultaneously dealing with rotational forces and at the same time it allows for better helmet ventilation too.What is MIPS?• MIPS is a Brain Protection System• Rotational motion can cause brain injuries• The low friction layer allows a sliding movement of 10–15 mm, in all directions, reducing rotational motion to the brain during impact• MIPS adds protectionCool and Fresh When You're in the FlowWhen you're in the zone and flowing down trails you're going to build up a  sweat. However, fear not the Super Air R won't let you overheat. 18 vents and the Overbrow Ventilation work with the carefully designed inner airflow channel matrix to keep fresh, cooling air whooshing over your scalp. Sweat Guide padding draws moisture away from the skin for dry comfort while X-static padding, woven with silver fibres to inhibit the growth of odour-causing bacteria and fungi, ensure you'll never suffer an itchy-scalp after a great session of mountain biking. Features:Fusion In-Mould Polycarbonate ShellProgressive Layering18 helmet vents, 8 chin bar vents, 4 brow portsWraparound Chin Bar - 2-click removableGoggleGuide™ Adjustable VisorIntegrated Breakaway Camera MountSweat Guide paddingX-Static® PaddingFLEX Spherical + MIPS®Buy Bell Helmets from Chain Reaction Cycles. The World's Largest Online Bike Store.

Bell Super Air R Full Face HelmetThe Bell Super Air R Full Face Helmet is their most advanced mountain bike helmet to date. It's also the most versatile. FLEX Spherical + MIPS® protection and a removable chinbar offer incredible protection and comfort, perfect for the climbs and the gnarliest of downs.Easily adapted to take on any trail, from a tough technical climb to flowing singletrack to super steep and rocky chutes, the Bell Super Air R Full Face Helmet can do it all. With two clicks the chinbar can be removed and stowed in a backpack, giving the extra airflow of an open face lid on the ride to the trailhead. When the downhill beckons clip it back on for full-face protection. Quick. Simple. Awesome. When it comes to protection in the event of a crash, the Super Air R has a number of features to keep you safe and let you get up and keep riding. It starts with the Fusion In-Mould design, pioneered by Bell. A tough polycarbonate outer shell is bonded directly to a multi-density energy-absorbing EPS (Expanded Polystyrene) inner, dissipating the forces involved when your head hits the dirt. Next comes the FLEX Spherical + MIPS® system. FLEX Spherical + MIPS® ((Multi-directional Impact Protection System)The FLEX Spherical + MIPS® is the latest generation of slip-plane protection, designed to minimise the rotational forces placed on the head in the event of a crash. In doing so brain injuries are minimised. The FLEX Spherical + MIPS® has been created to address both high-speed and low-speed impacts while simultaneously dealing with rotational forces and at the same time it allows for better helmet ventilation too.What is MIPS?• MIPS is a Brain Protection System• Rotational motion can cause brain injuries• The low friction layer allows a sliding movement of 10–15 mm, in all directions, reducing rotational motion to the brain during impact• MIPS adds protectionCool and Fresh When You're in the FlowWhen you're in the zone and flowing down trails you're going to build up a  sweat. However, fear not the Super Air R won't let you overheat. 18 vents and the Overbrow Ventilation work with the carefully designed inner airflow channel matrix to keep fresh, cooling air whooshing over your scalp. Sweat Guide padding draws moisture away from the skin for dry comfort while X-static padding, woven with silver fibres to inhibit the growth of odour-causing bacteria and fungi, ensure you'll never suffer an itchy-scalp after a great session of mountain biking. Features:Fusion In-Mould Polycarbonate ShellProgressive Layering18 helmet vents, 8 chin bar vents, 4 brow portsWraparound Chin Bar - 2-click removableGoggleGuide™ Adjustable VisorIntegrated Breakaway Camera MountSweat Guide paddingX-Static® PaddingFLEX Spherical + MIPS®Buy Bell Helmets from Chain Reaction Cycles. The World's Largest Online Bike Store.

Bell Falcon MIPS HelmetTo get the best cycling head protection doesn't have to cost a fortune, as proved by the Bell Falcon MIPS Helmet. With Fusion In-mould and MIPS technology combined, this is a helmet you can rely on to keep you covered should you take a fall.The Falcon MIPS Helmet benefits from the trickle-down technology from Bell's flagship models, giving a brilliant performance to price ratio. The Fusion In-mould technology, pioneered by Bell, takes a tough polycarbonate shell and bonds it directly to a shock-absorbing foam liner - the result is a helmet that can take the knocks of daily use and offer excellent protection in the event of a crash. This durable technology also allows Bell to boost the number of vents without compromising crash protection. Dialling in a perfect fit is also fabulously easy via the Bell Float Fit system. Adjustment is by way of a rubber-coated dial to get the fit just right both by height and width. No-Twist Tri-Glide fasteners also keep the straps flat and in place, for even greater riding comfort. Lastly, 'Sweat Guide' padding at the brow draws moisture away from the forehead, ensuring no stinging sweat can run into the eyes. MIPS System (Multi-directional Impact Protection System)The Falcon MIPS Cycle Helmet is designed to dissipate the energy from a crash and this is achieved via the EPS body and the MIPS System (Multi-directional Impact Protection System). This MIPS is integrated with the fit system to give a sleeker, lighter and less complex helmet that fits closely to the head.What is MIPS?• MIPS is a Brain Protection System• Rotational motion can cause brain injuries• The low friction layer allows a sliding movement of 10–15 mm, in all directions, reducing rotational motion to the brain during impact• MIPS adds protectionFeatures:Fusion In-Mould polycarbonate shellLightweight internal polycarbonate roll cageMIPS® technologyFloat Fit system (integrated with MIPS)No-Twist Tri-GlidesSweat Guide padding18 VentsCE EN1078 certifiedWeight: 284gBuy Bell Helmets from Chain Reaction Cycles. The World's Largest Online Bike Store.

Bell Falcon MIPS HelmetTo get the best cycling head protection doesn't have to cost a fortune, as proved by the Bell Falcon MIPS Helmet. With Fusion In-mould and MIPS technology combined, this is a helmet you can rely on to keep you covered should you take a fall.The Falcon MIPS Helmet benefits from the trickle-down technology from Bell's flagship models, giving a brilliant performance to price ratio. The Fusion In-mould technology, pioneered by Bell, takes a tough polycarbonate shell and bonds it directly to a shock-absorbing foam liner - the result is a helmet that can take the knocks of daily use and offer excellent protection in the event of a crash. This durable technology also allows Bell to boost the number of vents without compromising crash protection. Dialling in a perfect fit is also fabulously easy via the Bell Float Fit system. Adjustment is by way of a rubber-coated dial to get the fit just right both by height and width. No-Twist Tri-Glide fasteners also keep the straps flat and in place, for even greater riding comfort. Lastly, 'Sweat Guide' padding at the brow draws moisture away from the forehead, ensuring no stinging sweat can run into the eyes. MIPS System (Multi-directional Impact Protection System)The Falcon MIPS Cycle Helmet is designed to dissipate the energy from a crash and this is achieved via the EPS body and the MIPS System (Multi-directional Impact Protection System). This MIPS is integrated with the fit system to give a sleeker, lighter and less complex helmet that fits closely to the head.What is MIPS?• MIPS is a Brain Protection System• Rotational motion can cause brain injuries• The low friction layer allows a sliding movement of 10–15 mm, in all directions, reducing rotational motion to the brain during impact• MIPS adds protectionFeatures:Fusion In-Mould polycarbonate shellLightweight internal polycarbonate roll cageMIPS® technologyFloat Fit system (integrated with MIPS)No-Twist Tri-GlidesSweat Guide padding18 VentsCE EN1078 certifiedWeight: 284gBuy Bell Helmets from Chain Reaction Cycles. The World's Largest Online Bike Store.

Bell Falcon MIPS HelmetTo get the best cycling head protection doesn't have to cost a fortune, as proved by the Bell Falcon MIPS Helmet. With Fusion In-mould and MIPS technology combined, this is a helmet you can rely on to keep you covered should you take a fall.The Falcon MIPS Helmet benefits from the trickle-down technology from Bell's flagship models, giving a brilliant performance to price ratio. The Fusion In-mould technology, pioneered by Bell, takes a tough polycarbonate shell and bonds it directly to a shock-absorbing foam liner - the result is a helmet that can take the knocks of daily use and offer excellent protection in the event of a crash. This durable technology also allows Bell to boost the number of vents without compromising crash protection. Dialling in a perfect fit is also fabulously easy via the Bell Float Fit system. Adjustment is by way of a rubber-coated dial to get the fit just right both by height and width. No-Twist Tri-Glide fasteners also keep the straps flat and in place, for even greater riding comfort. Lastly, 'Sweat Guide' padding at the brow draws moisture away from the forehead, ensuring no stinging sweat can run into the eyes. MIPS System (Multi-directional Impact Protection System)The Falcon MIPS Cycle Helmet is designed to dissipate the energy from a crash and this is achieved via the EPS body and the MIPS System (Multi-directional Impact Protection System). This MIPS is integrated with the fit system to give a sleeker, lighter and less complex helmet that fits closely to the head.What is MIPS?• MIPS is a Brain Protection System• Rotational motion can cause brain injuries• The low friction layer allows a sliding movement of 10–15 mm, in all directions, reducing rotational motion to the brain during impact• MIPS adds protectionFeatures:Fusion In-Mould polycarbonate shellLightweight internal polycarbonate roll cageMIPS® technologyFloat Fit system (integrated with MIPS)No-Twist Tri-GlidesSweat Guide padding18 VentsCE EN1078 certifiedWeight: 284gBuy Bell Helmets from Chain Reaction Cycles. The World's Largest Online Bike Store.

Bell Falcon MIPS HelmetTo get the best cycling head protection doesn't have to cost a fortune, as proved by the Bell Falcon MIPS Helmet. With Fusion In-mould and MIPS technology combined, this is a helmet you can rely on to keep you covered should you take a fall.The Falcon MIPS Helmet benefits from the trickle-down technology from Bell's flagship models, giving a brilliant performance to price ratio. The Fusion In-mould technology, pioneered by Bell, takes a tough polycarbonate shell and bonds it directly to a shock-absorbing foam liner - the result is a helmet that can take the knocks of daily use and offer excellent protection in the event of a crash. This durable technology also allows Bell to boost the number of vents without compromising crash protection. Dialling in a perfect fit is also fabulously easy via the Bell Float Fit system. Adjustment is by way of a rubber-coated dial to get the fit just right both by height and width. No-Twist Tri-Glide fasteners also keep the straps flat and in place, for even greater riding comfort. Lastly, 'Sweat Guide' padding at the brow draws moisture away from the forehead, ensuring no stinging sweat can run into the eyes. MIPS System (Multi-directional Impact Protection System)The Falcon MIPS Cycle Helmet is designed to dissipate the energy from a crash and this is achieved via the EPS body and the MIPS System (Multi-directional Impact Protection System). This MIPS is integrated with the fit system to give a sleeker, lighter and less complex helmet that fits closely to the head.What is MIPS?• MIPS is a Brain Protection System• Rotational motion can cause brain injuries• The low friction layer allows a sliding movement of 10–15 mm, in all directions, reducing rotational motion to the brain during impact• MIPS adds protectionFeatures:Fusion In-Mould polycarbonate shellLightweight internal polycarbonate roll cageMIPS® technologyFloat Fit system (integrated with MIPS)No-Twist Tri-GlidesSweat Guide padding18 VentsCE EN1078 certifiedWeight: 284gBuy Bell Helmets from Chain Reaction Cycles. The World's Largest Online Bike Store.

Bell Falcon MIPS HelmetTo get the best cycling head protection doesn't have to cost a fortune, as proved by the Bell Falcon MIPS Helmet. With Fusion In-mould and MIPS technology combined, this is a helmet you can rely on to keep you covered should you take a fall.The Falcon MIPS Helmet benefits from the trickle-down technology from Bell's flagship models, giving a brilliant performance to price ratio. The Fusion In-mould technology, pioneered by Bell, takes a tough polycarbonate shell and bonds it directly to a shock-absorbing foam liner - the result is a helmet that can take the knocks of daily use and offer excellent protection in the event of a crash. This durable technology also allows Bell to boost the number of vents without compromising crash protection. Dialling in a perfect fit is also fabulously easy via the Bell Float Fit system. Adjustment is by way of a rubber-coated dial to get the fit just right both by height and width. No-Twist Tri-Glide fasteners also keep the straps flat and in place, for even greater riding comfort. Lastly, 'Sweat Guide' padding at the brow draws moisture away from the forehead, ensuring no stinging sweat can run into the eyes. MIPS System (Multi-directional Impact Protection System)The Falcon MIPS Cycle Helmet is designed to dissipate the energy from a crash and this is achieved via the EPS body and the MIPS System (Multi-directional Impact Protection System). This MIPS is integrated with the fit system to give a sleeker, lighter and less complex helmet that fits closely to the head.What is MIPS?• MIPS is a Brain Protection System• Rotational motion can cause brain injuries• The low friction layer allows a sliding movement of 10–15 mm, in all directions, reducing rotational motion to the brain during impact• MIPS adds protectionFeatures:Fusion In-Mould polycarbonate shellLightweight internal polycarbonate roll cageMIPS® technologyFloat Fit system (integrated with MIPS)No-Twist Tri-GlidesSweat Guide padding18 VentsCE EN1078 certifiedWeight: 284gBuy Bell Helmets from Chain Reaction Cycles. The World's Largest Online Bike Store.

Bell Falcon MIPS HelmetTo get the best cycling head protection doesn't have to cost a fortune, as proved by the Bell Falcon MIPS Helmet. With Fusion In-mould and MIPS technology combined, this is a helmet you can rely on to keep you covered should you take a fall.The Falcon MIPS Helmet benefits from the trickle-down technology from Bell's flagship models, giving a brilliant performance to price ratio. The Fusion In-mould technology, pioneered by Bell, takes a tough polycarbonate shell and bonds it directly to a shock-absorbing foam liner - the result is a helmet that can take the knocks of daily use and offer excellent protection in the event of a crash. This durable technology also allows Bell to boost the number of vents without compromising crash protection. Dialling in a perfect fit is also fabulously easy via the Bell Float Fit system. Adjustment is by way of a rubber-coated dial to get the fit just right both by height and width. No-Twist Tri-Glide fasteners also keep the straps flat and in place, for even greater riding comfort. Lastly, 'Sweat Guide' padding at the brow draws moisture away from the forehead, ensuring no stinging sweat can run into the eyes. MIPS System (Multi-directional Impact Protection System)The Falcon MIPS Cycle Helmet is designed to dissipate the energy from a crash and this is achieved via the EPS body and the MIPS System (Multi-directional Impact Protection System). This MIPS is integrated with the fit system to give a sleeker, lighter and less complex helmet that fits closely to the head.What is MIPS?• MIPS is a Brain Protection System• Rotational motion can cause brain injuries• The low friction layer allows a sliding movement of 10–15 mm, in all directions, reducing rotational motion to the brain during impact• MIPS adds protectionFeatures:Fusion In-Mould polycarbonate shellLightweight internal polycarbonate roll cageMIPS® technologyFloat Fit system (integrated with MIPS)No-Twist Tri-GlidesSweat Guide padding18 VentsCE EN1078 certifiedWeight: 284gBuy Bell Helmets from Chain Reaction Cycles. The World's Largest Online Bike Store.

Bell Falcon MIPS HelmetTo get the best cycling head protection doesn't have to cost a fortune, as proved by the Bell Falcon MIPS Helmet. With Fusion In-mould and MIPS technology combined, this is a helmet you can rely on to keep you covered should you take a fall.The Falcon MIPS Helmet benefits from the trickle-down technology from Bell's flagship models, giving a brilliant performance to price ratio. The Fusion In-mould technology, pioneered by Bell, takes a tough polycarbonate shell and bonds it directly to a shock-absorbing foam liner - the result is a helmet that can take the knocks of daily use and offer excellent protection in the event of a crash. This durable technology also allows Bell to boost the number of vents without compromising crash protection. Dialling in a perfect fit is also fabulously easy via the Bell Float Fit system. Adjustment is by way of a rubber-coated dial to get the fit just right both by height and width. No-Twist Tri-Glide fasteners also keep the straps flat and in place, for even greater riding comfort. Lastly, 'Sweat Guide' padding at the brow draws moisture away from the forehead, ensuring no stinging sweat can run into the eyes. MIPS System (Multi-directional Impact Protection System)The Falcon MIPS Cycle Helmet is designed to dissipate the energy from a crash and this is achieved via the EPS body and the MIPS System (Multi-directional Impact Protection System). This MIPS is integrated with the fit system to give a sleeker, lighter and less complex helmet that fits closely to the head.What is MIPS?• MIPS is a Brain Protection System• Rotational motion can cause brain injuries• The low friction layer allows a sliding movement of 10–15 mm, in all directions, reducing rotational motion to the brain during impact• MIPS adds protectionFeatures:Fusion In-Mould polycarbonate shellLightweight internal polycarbonate roll cageMIPS® technologyFloat Fit system (integrated with MIPS)No-Twist Tri-GlidesSweat Guide padding18 VentsCE EN1078 certifiedWeight: 284gBuy Bell Helmets from Chain Reaction Cycles. The World's Largest Online Bike Store.

Bell Falcon MIPS HelmetTo get the best cycling head protection doesn't have to cost a fortune, as proved by the Bell Falcon MIPS Helmet. With Fusion In-mould and MIPS technology combined, this is a helmet you can rely on to keep you covered should you take a fall.The Falcon MIPS Helmet benefits from the trickle-down technology from Bell's flagship models, giving a brilliant performance to price ratio. The Fusion In-mould technology, pioneered by Bell, takes a tough polycarbonate shell and bonds it directly to a shock-absorbing foam liner - the result is a helmet that can take the knocks of daily use and offer excellent protection in the event of a crash. This durable technology also allows Bell to boost the number of vents without compromising crash protection. Dialling in a perfect fit is also fabulously easy via the Bell Float Fit system. Adjustment is by way of a rubber-coated dial to get the fit just right both by height and width. No-Twist Tri-Glide fasteners also keep the straps flat and in place, for even greater riding comfort. Lastly, 'Sweat Guide' padding at the brow draws moisture away from the forehead, ensuring no stinging sweat can run into the eyes. MIPS System (Multi-directional Impact Protection System)The Falcon MIPS Cycle Helmet is designed to dissipate the energy from a crash and this is achieved via the EPS body and the MIPS System (Multi-directional Impact Protection System). This MIPS is integrated with the fit system to give a sleeker, lighter and less complex helmet that fits closely to the head.What is MIPS?• MIPS is a Brain Protection System• Rotational motion can cause brain injuries• The low friction layer allows a sliding movement of 10–15 mm, in all directions, reducing rotational motion to the brain during impact• MIPS adds protectionFeatures:Fusion In-Mould polycarbonate shellLightweight internal polycarbonate roll cageMIPS® technologyFloat Fit system (integrated with MIPS)No-Twist Tri-GlidesSweat Guide padding18 VentsCE EN1078 certifiedWeight: 284gBuy Bell Helmets from Chain Reaction Cycles. The World's Largest Online Bike Store.

Bell Falcon MIPS HelmetTo get the best cycling head protection doesn't have to cost a fortune, as proved by the Bell Falcon MIPS Helmet. With Fusion In-mould and MIPS technology combined, this is a helmet you can rely on to keep you covered should you take a fall.The Falcon MIPS Helmet benefits from the trickle-down technology from Bell's flagship models, giving a brilliant performance to price ratio. The Fusion In-mould technology, pioneered by Bell, takes a tough polycarbonate shell and bonds it directly to a shock-absorbing foam liner - the result is a helmet that can take the knocks of daily use and offer excellent protection in the event of a crash. This durable technology also allows Bell to boost the number of vents without compromising crash protection. Dialling in a perfect fit is also fabulously easy via the Bell Float Fit system. Adjustment is by way of a rubber-coated dial to get the fit just right both by height and width. No-Twist Tri-Glide fasteners also keep the straps flat and in place, for even greater riding comfort. Lastly, 'Sweat Guide' padding at the brow draws moisture away from the forehead, ensuring no stinging sweat can run into the eyes. MIPS System (Multi-directional Impact Protection System)The Falcon MIPS Cycle Helmet is designed to dissipate the energy from a crash and this is achieved via the EPS body and the MIPS System (Multi-directional Impact Protection System). This MIPS is integrated with the fit system to give a sleeker, lighter and less complex helmet that fits closely to the head.What is MIPS?• MIPS is a Brain Protection System• Rotational motion can cause brain injuries• The low friction layer allows a sliding movement of 10–15 mm, in all directions, reducing rotational motion to the brain during impact• MIPS adds protectionFeatures:Fusion In-Mould polycarbonate shellLightweight internal polycarbonate roll cageMIPS® technologyFloat Fit system (integrated with MIPS)No-Twist Tri-GlidesSweat Guide padding18 VentsCE EN1078 certifiedWeight: 284gBuy Bell Helmets from Chain Reaction Cycles. The World's Largest Online Bike Store.

Bell Trace MIPS HelmetBe it a fun family bike ride, a daily commute or long adventure ride, the Bell Trace MIPS offers incredible protection, comfort and style. And all at a brilliant value price point. The Trace MIPS brings advanced protection to your ride, trickled down from Bell's flagship helmets, letting you enjoy your ride safely. It begins with the Fusion In-mould technology, pioneered by Bell. This takes a tough polycarbonate shell and bonds it directly to a shock-absorbing foam liner - the result is a tough and durable helmet that can take the knocks of daily use and excellent protection in the event of a crash. This durable technology also allows Bell to boost the number of vents without compromising crash protection. Achieving the perfect fit is also delightfully easy via the Bell Ergo Fit system. Adjustment is by way of a single dial to get the fit just right, even when you're pedalling. No-Twist Tri-Glide fasteners also keep the straps flat and in place, for even greater riding comfort. Lastly, 'Sweat Guide' padding at the brow draws moisture away from the forehead, ensuring no stinging sweat can run into the eyes.MIPS System (Multi-directional Impact Protection System)The Trace MIPS Cycle Helmet is designed to dissipate the energy from a crash and this is achieved via the EPS (Expanded Polystyrene) body and the MIPS System (Multi-directional Impact Protection System). This MIPS is integrated with the fit system to give a sleeker, lighter and less complex helmet that fits closely to the head.What is MIPS?• MIPS is a Brain Protection System• Rotational motion can cause brain injuries• The low friction layer allows a sliding movement of 10–15 mm, in all directions, reducing rotational motion to the brain during impact• MIPS adds protectionFeatures:Fusion In-Mould Polycarbonate Shell16 ventsNo-Twist Tri-Glide fastenersSweat Guide paddingErgo-Fit systemMIPS® (integrated with fit system)Buy Bell Helmets from Chain Reaction Cycles. The World's Largest Online Bike Store.

Bell Trace MIPS HelmetBe it a fun family bike ride, a daily commute or long adventure ride, the Bell Trace MIPS offers incredible protection, comfort and style. And all at a brilliant value price point. The Trace MIPS brings advanced protection to your ride, trickled down from Bell's flagship helmets, letting you enjoy your ride safely. It begins with the Fusion In-mould technology, pioneered by Bell. This takes a tough polycarbonate shell and bonds it directly to a shock-absorbing foam liner - the result is a tough and durable helmet that can take the knocks of daily use and excellent protection in the event of a crash. This durable technology also allows Bell to boost the number of vents without compromising crash protection. Achieving the perfect fit is also delightfully easy via the Bell Ergo Fit system. Adjustment is by way of a single dial to get the fit just right, even when you're pedalling. No-Twist Tri-Glide fasteners also keep the straps flat and in place, for even greater riding comfort. Lastly, 'Sweat Guide' padding at the brow draws moisture away from the forehead, ensuring no stinging sweat can run into the eyes.MIPS System (Multi-directional Impact Protection System)The Trace MIPS Cycle Helmet is designed to dissipate the energy from a crash and this is achieved via the EPS (Expanded Polystyrene) body and the MIPS System (Multi-directional Impact Protection System). This MIPS is integrated with the fit system to give a sleeker, lighter and less complex helmet that fits closely to the head.What is MIPS?• MIPS is a Brain Protection System• Rotational motion can cause brain injuries• The low friction layer allows a sliding movement of 10–15 mm, in all directions, reducing rotational motion to the brain during impact• MIPS adds protectionFeatures:Fusion In-Mould Polycarbonate Shell16 ventsNo-Twist Tri-Glide fastenersSweat Guide paddingErgo-Fit systemMIPS® (integrated with fit system)Buy Bell Helmets from Chain Reaction Cycles. The World's Largest Online Bike Store.

Bell Trace MIPS HelmetBe it a fun family bike ride, a daily commute or long adventure ride, the Bell Trace MIPS offers incredible protection, comfort and style. And all at a brilliant value price point. The Trace MIPS brings advanced protection to your ride, trickled down from Bell's flagship helmets, letting you enjoy your ride safely. It begins with the Fusion In-mould technology, pioneered by Bell. This takes a tough polycarbonate shell and bonds it directly to a shock-absorbing foam liner - the result is a tough and durable helmet that can take the knocks of daily use and excellent protection in the event of a crash. This durable technology also allows Bell to boost the number of vents without compromising crash protection. Achieving the perfect fit is also delightfully easy via the Bell Ergo Fit system. Adjustment is by way of a single dial to get the fit just right, even when you're pedalling. No-Twist Tri-Glide fasteners also keep the straps flat and in place, for even greater riding comfort. Lastly, 'Sweat Guide' padding at the brow draws moisture away from the forehead, ensuring no stinging sweat can run into the eyes.MIPS System (Multi-directional Impact Protection System)The Trace MIPS Cycle Helmet is designed to dissipate the energy from a crash and this is achieved via the EPS (Expanded Polystyrene) body and the MIPS System (Multi-directional Impact Protection System). This MIPS is integrated with the fit system to give a sleeker, lighter and less complex helmet that fits closely to the head.What is MIPS?• MIPS is a Brain Protection System• Rotational motion can cause brain injuries• The low friction layer allows a sliding movement of 10–15 mm, in all directions, reducing rotational motion to the brain during impact• MIPS adds protectionFeatures:Fusion In-Mould Polycarbonate Shell16 ventsNo-Twist Tri-Glide fastenersSweat Guide paddingErgo-Fit systemMIPS® (integrated with fit system)Buy Bell Helmets from Chain Reaction Cycles. The World's Largest Online Bike Store.

Bell Avenue HelmetGreat value head protection doesn't get better than Bell's Avenue Cycle Helmet. With many premium features taken from their high-end helmets, the Avenue will keep you safe and comfortable as you enjoy all your bike rides.  The Avenue Helmet features the very same Fusion In-mould technology as deployed on their flagship cycle helmet. This technology, pioneered by Bell, takes a tough polycarbonate shell and bonds it directly to a shock-absorbing foam liner - the result is a helmet that can take the knocks of daily use and gives excellent protection in the event of a crash. At the same time, this same technology allows Bell to sculpt the helmet into a smooth and sleek design with a total of 18 air vents to ensure a cool head as you pick up speed.  Dialling in a perfect fit is also fabulously easy via the Bell Ergo Fit System. Adjustment is by way of a  rear dial, allowing you to get the fit just as you like it for comfort and make the helmet secure, keeping it in place should you take a tumble. No-Twist Tri-Glide fasteners also keep the straps flat and in place, for even greater riding comfort. Lastly, 'Sweat Guide' padding at the brow draws moisture away from the forehead, ensuring no stinging sweat can run into the eyes. Features:Fusion in-mould polycarbonate shell18 VentsErgo Fit SystemNo-Twist Tri-GlidesSweat GuideBuy Bell Helmets from Chain Reaction Cycles. The World's Largest Online Bike Store.