Stages Cycling Power G3 L - Energy BB30Ridden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any FSA or Vision BB30 road drivetrain.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within an FSA Energy BB30 crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:     Accelerometer based cadence measurement        Wirelessly upgradable firmware        LED indicator displays battery level        Updated accelerometer and addition of gyroscope        Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength        Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter        Power Range (Watts): 0 to 5000        Cadence range (rpm): 10-220        Water Resistance Rating: IPX7     Weight: Only adds 20g to base crank armCompatibility:        Across the board compatibility with FSA and Vision BB30 models     Frame Compatibility: Most frames            Device Compatibility: ANT+, Bluetooth Smart ready         Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box:        Power meter        High-quality CR2032 coin cell battery        Product identification card with serial number and ANT+ I.D.        Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Stages Cycling Power G3 L - Energy BB30Ridden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any FSA or Vision BB30 road drivetrain.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within an FSA Energy BB30 crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:     Accelerometer based cadence measurement        Wirelessly upgradable firmware        LED indicator displays battery level        Updated accelerometer and addition of gyroscope        Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength        Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter        Power Range (Watts): 0 to 5000        Cadence range (rpm): 10-220        Water Resistance Rating: IPX7     Weight: Only adds 20g to base crank armCompatibility:        Across the board compatibility with FSA and Vision BB30 models     Frame Compatibility: Most frames            Device Compatibility: ANT+, Bluetooth Smart ready         Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box:        Power meter        High-quality CR2032 coin cell battery        Product identification card with serial number and ANT+ I.D.        Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Stages Cycling Power Meter G3 L - Campagnolo ChorusRidden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and is designed for use with a Campagnolo Chorus or Record road drivetrain.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a Campagnolo Chorus non-drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:  Accelerometer based cadence measurement     Wirelessly upgradable firmware     LED indicator displays battery level     Updated accelerometer and addition of gyroscope     Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength     Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter     Power Range (Watts): 0 to 5000     Cadence range (rpm): 10-220     Water Resistance Rating: IPX7  Weight: Only adds 20g to base crank armCompatibility:     Designed  for use with along with a drive side Campagnolo Chorus or Record crank arm.  It will not fit Campagnolo Super Record cranksets   Frame Compatibility: Most frames         Device Compatibility: ANT+, Bluetooth Smart ready      Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box:     Power meter     High-quality CR2032 coin cell battery     Product identification card with serial number and ANT+ I.D.     Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Stages Cycling Power Meter G3 L - Campagnolo ChorusRidden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and is designed for use with a Campagnolo Chorus or Record road drivetrain.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a Campagnolo Chorus non-drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:  Accelerometer based cadence measurement     Wirelessly upgradable firmware     LED indicator displays battery level     Updated accelerometer and addition of gyroscope     Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength     Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter     Power Range (Watts): 0 to 5000     Cadence range (rpm): 10-220     Water Resistance Rating: IPX7  Weight: Only adds 20g to base crank armCompatibility:     Designed  for use with along with a drive side Campagnolo Chorus or Record crank arm.  It will not fit Campagnolo Super Record cranksets   Frame Compatibility: Most frames         Device Compatibility: ANT+, Bluetooth Smart ready      Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box:     Power meter     High-quality CR2032 coin cell battery     Product identification card with serial number and ANT+ I.D.     Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Stages Cycling Power Meter G3 L - Campagnolo ChorusRidden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and is designed for use with a Campagnolo Chorus or Record road drivetrain.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a Campagnolo Chorus non-drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:  Accelerometer based cadence measurement     Wirelessly upgradable firmware     LED indicator displays battery level     Updated accelerometer and addition of gyroscope     Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength     Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter     Power Range (Watts): 0 to 5000     Cadence range (rpm): 10-220     Water Resistance Rating: IPX7  Weight: Only adds 20g to base crank armCompatibility:     Designed  for use with along with a drive side Campagnolo Chorus or Record crank arm.  It will not fit Campagnolo Super Record cranksets   Frame Compatibility: Most frames         Device Compatibility: ANT+, Bluetooth Smart ready      Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box:     Power meter     High-quality CR2032 coin cell battery     Product identification card with serial number and ANT+ I.D.     Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Stages Cycling Power Meter G3 L - FSA SL-K BB30Ridden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any FSA or Vision BB30 road drivetrain.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a FSA SL-K BB30 crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:  Accelerometer based cadence measurement     Wirelessly upgradable firmware     LED indicator displays battery level     Updated accelerometer and addition of gyroscope     Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength     Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter     Power Range (Watts): 0 to 5000     Cadence range (rpm): 10-220     Water Resistance Rating: IPX7  Weight: Only adds 20g to base crank armCompatibility:      Across the board compatibility with FSA and Vision BB30 models   Frame Compatibility: Most frames         Device Compatibility: ANT+, Bluetooth Smart ready      Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box:     Power meter     High-quality CR2032 coin cell battery     Product identification card with serial number and ANT+ I.D.     Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Stages Power Meter G3 L - Dura-Ace 9100Ridden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any Shimano road drivetrain.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a Dura-Ace  9100 non-drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:  Accelerometer based cadence measurement     Wirelessly upgradable firmware     LED indicator displays battery level     Updated accelerometer and addition of gyroscope     Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength     Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter     Power Range (Watts): 0 to 5000     Cadence range (rpm): 10-220     Water Resistance Rating: IPX7  Weight: Only adds 20g to base crank armCompatibility:     Compatible with all Shimano Hollowtech II road drivetrains     Frame Compatibility: Most frames     Device Compatibility: ANT+, Bluetooth Smart ready      Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box:     Power meter     High-quality CR2032 coin cell battery     Product identification card with serial number and ANT+ I.D.     Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Stages Cycling Power Meter G3 L - FSA SL-K BB30Ridden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any FSA or Vision BB30 road drivetrain.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a FSA SL-K BB30 crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:  Accelerometer based cadence measurement     Wirelessly upgradable firmware     LED indicator displays battery level     Updated accelerometer and addition of gyroscope     Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength     Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter     Power Range (Watts): 0 to 5000     Cadence range (rpm): 10-220     Water Resistance Rating: IPX7  Weight: Only adds 20g to base crank armCompatibility:      Across the board compatibility with FSA and Vision BB30 models   Frame Compatibility: Most frames         Device Compatibility: ANT+, Bluetooth Smart ready      Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box:     Power meter     High-quality CR2032 coin cell battery     Product identification card with serial number and ANT+ I.D.     Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Stages Power Meter G3 L - Dura-Ace 9100Ridden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any Shimano road drivetrain.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a Dura-Ace  9100 non-drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:  Accelerometer based cadence measurement     Wirelessly upgradable firmware     LED indicator displays battery level     Updated accelerometer and addition of gyroscope     Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength     Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter     Power Range (Watts): 0 to 5000     Cadence range (rpm): 10-220     Water Resistance Rating: IPX7  Weight: Only adds 20g to base crank armCompatibility:     Compatible with all Shimano Hollowtech II road drivetrains     Frame Compatibility: Most frames     Device Compatibility: ANT+, Bluetooth Smart ready      Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box:     Power meter     High-quality CR2032 coin cell battery     Product identification card with serial number and ANT+ I.D.     Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Stages Power Meter G3 L - Dura-Ace 9100Ridden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any Shimano road drivetrain.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a Dura-Ace  9100 non-drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:  Accelerometer based cadence measurement     Wirelessly upgradable firmware     LED indicator displays battery level     Updated accelerometer and addition of gyroscope     Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength     Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter     Power Range (Watts): 0 to 5000     Cadence range (rpm): 10-220     Water Resistance Rating: IPX7  Weight: Only adds 20g to base crank armCompatibility:     Compatible with all Shimano Hollowtech II road drivetrains     Frame Compatibility: Most frames     Device Compatibility: ANT+, Bluetooth Smart ready      Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box:     Power meter     High-quality CR2032 coin cell battery     Product identification card with serial number and ANT+ I.D.     Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Stages Cycling Power Meter G3 L - Cannondale Si HGRidden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with Cannondale Hollowgram chainsets from 2014 onwards.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a Cannondale Hollowgram Si  non-drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:  Accelerometer based cadence measurement     Wirelessly upgradable firmware     LED indicator displays battery level     Updated accelerometer and addition of gyroscope     Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength     Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter     Power Range (Watts): 0 to 5000     Cadence range (rpm): 10-220     Water Resistance Rating: IPX7  Weight: Only adds 20g to base crank armCompatibility:     Compatible with existing Cannondale Hollowgram Si crank models - 2014 or newer and Hollowgram SiSL2 cranks     Frame Compatibility: Most frames     Device Compatibility: ANT+, Bluetooth Smart ready      Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box:     Power meter     High-quality CR2032 coin cell battery     Product identification card with serial number and ANT+ I.D.     Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Stages Cycling Power Meter G3 L - Cannondale Si HGRidden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with Cannondale Hollowgram chainsets from 2014 onwards.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a Cannondale Hollowgram Si  non-drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:  Accelerometer based cadence measurement     Wirelessly upgradable firmware     LED indicator displays battery level     Updated accelerometer and addition of gyroscope     Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength     Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter     Power Range (Watts): 0 to 5000     Cadence range (rpm): 10-220     Water Resistance Rating: IPX7  Weight: Only adds 20g to base crank armCompatibility:     Compatible with existing Cannondale Hollowgram Si crank models - 2014 or newer and Hollowgram SiSL2 cranks     Frame Compatibility: Most frames     Device Compatibility: ANT+, Bluetooth Smart ready      Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box:     Power meter     High-quality CR2032 coin cell battery     Product identification card with serial number and ANT+ I.D.     Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Stages Cycling Power Meter G3 L - Cannondale Si HGRidden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with Cannondale Hollowgram chainsets from 2014 onwards.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a Cannondale Hollowgram Si  non-drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:  Accelerometer based cadence measurement     Wirelessly upgradable firmware     LED indicator displays battery level     Updated accelerometer and addition of gyroscope     Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength     Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter     Power Range (Watts): 0 to 5000     Cadence range (rpm): 10-220     Water Resistance Rating: IPX7  Weight: Only adds 20g to base crank armCompatibility:     Compatible with existing Cannondale Hollowgram Si crank models - 2014 or newer and Hollowgram SiSL2 cranks     Frame Compatibility: Most frames     Device Compatibility: ANT+, Bluetooth Smart ready      Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box:     Power meter     High-quality CR2032 coin cell battery     Product identification card with serial number and ANT+ I.D.     Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Stages Cycling Power G3 L - Stages Carbon GXP MTBRidden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any SRAM MTB drivetrain.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a SRAM Mountain Bike GXP non-drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:  Accelerometer based cadence measurement     Wirelessly upgradable firmware     LED indicator displays battery level     Updated accelerometer and addition of gyroscope     Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength     Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter     Power Range (Watts): 0 to 5000     Cadence range (rpm): 10-220     Water Resistance Rating: IPX7  Weight: Only adds 20g to base crank armCompatibility:     Compatible with all SRAM GXP Mountain Bike drivetrains     Frame Compatibility: Most frames     Device Compatibility: ANT+, Bluetooth Smart ready      Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box:     Power meter     High-quality CR2032 coin cell battery     Product identification card with serial number and ANT+ I.D.     Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Stages Cycling Power G3 L - Stages Carbon GXP MTBRidden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any SRAM MTB drivetrain.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a SRAM Mountain Bike GXP non-drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:  Accelerometer based cadence measurement     Wirelessly upgradable firmware     LED indicator displays battery level     Updated accelerometer and addition of gyroscope     Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength     Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter     Power Range (Watts): 0 to 5000     Cadence range (rpm): 10-220     Water Resistance Rating: IPX7  Weight: Only adds 20g to base crank armCompatibility:     Compatible with all SRAM GXP Mountain Bike drivetrains     Frame Compatibility: Most frames     Device Compatibility: ANT+, Bluetooth Smart ready      Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box:     Power meter     High-quality CR2032 coin cell battery     Product identification card with serial number and ANT+ I.D.     Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Stages Cycling Power G3 L - Stages Carbon GXP RoadRidden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any SRAM road drivetrain.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a SRAM Road GXP non-drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:  Accelerometer based cadence measurement     Wirelessly upgradable firmware     LED indicator displays battery level     Updated accelerometer and addition of gyroscope     Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength     Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter     Power Range (Watts): 0 to 5000     Cadence range (rpm): 10-220     Water Resistance Rating: IPX7  Weight: Only adds 20g to base crank armCompatibility:     Compatible with all SRAM GXP road drivetrains     Frame Compatibility: Most frames     Device Compatibility: ANT+, Bluetooth Smart ready      Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box:     Power meter     High-quality CR2032 coin cell battery     Product identification card with serial number and ANT+ I.D.     Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Stages Cycling Power G3 L - Stages Carbon GXP RoadRidden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any SRAM road drivetrain.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a SRAM Road GXP non-drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:  Accelerometer based cadence measurement     Wirelessly upgradable firmware     LED indicator displays battery level     Updated accelerometer and addition of gyroscope     Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength     Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter     Power Range (Watts): 0 to 5000     Cadence range (rpm): 10-220     Water Resistance Rating: IPX7  Weight: Only adds 20g to base crank armCompatibility:     Compatible with all SRAM GXP road drivetrains     Frame Compatibility: Most frames     Device Compatibility: ANT+, Bluetooth Smart ready      Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box:     Power meter     High-quality CR2032 coin cell battery     Product identification card with serial number and ANT+ I.D.     Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Stages Cycling Power Meter G3 L - XTR M9000Ridden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any Shimano MTB drivetrain.Stages Power with Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a Shimano XTR M9000 non-drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Power Meter Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong Bluetooth and ANT+ ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:     Accelerometer based cadence measurement        Wirelessly upgradable firmware        LED indicator displays battery level        Updated accelerometer and addition of gyroscope        Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength        Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter        Power Range (Watts): 0 to 5000        Cadence range (rpm): 10-220        Water Resistance Rating: IPX7     Weight: Only adds 20g to base crank armCompatibility:        Compatible with Shimano Hollowtech II MTB drivetrains     Frame Compatibility: Most frames            Device Compatibility: ANT+, Bluetooth Smart ready         Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box:        Power meter        High-quality CR2032 coin cell battery        Product identification card with serial number and ANT+ I.D.        Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Stages Cycling Power G3 L - Stages Carbon GXP RoadRidden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any SRAM road drivetrain.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a SRAM Road GXP non-drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:  Accelerometer based cadence measurement     Wirelessly upgradable firmware     LED indicator displays battery level     Updated accelerometer and addition of gyroscope     Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength     Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter     Power Range (Watts): 0 to 5000     Cadence range (rpm): 10-220     Water Resistance Rating: IPX7  Weight: Only adds 20g to base crank armCompatibility:     Compatible with all SRAM GXP road drivetrains     Frame Compatibility: Most frames     Device Compatibility: ANT+, Bluetooth Smart ready      Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box:     Power meter     High-quality CR2032 coin cell battery     Product identification card with serial number and ANT+ I.D.     Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Knog Light Blinder Mob Eyeballer Front LightSmall but mighty! Exposure’s Light Blinder Mob Eyeballer is the ultimate, easy to handle, commuter front light.Light ModesThe light comes with 5 different light modes which are easy to toggle between to best suit your battery life and current lighting environment. The light modes included are:Steady High: 2.7 hours battery lifeSteady Low: 8 hours battery lifeStrobe: 5.7 hours battery lifeFancy Flash: 5.5 hours battery lifeEco Flash: 76 hours battery lifeRechargeableTo safe you the constant hassle of having to change out your bike light’s batteries the Eyeballer comes with a fully integrated USB rechargeable battery. This means you can charge your bike light from any standard USB port – these can easily be found as part of your smartphone charger, laptop, computer desktop etc.In the BoxLight Blinder Mob Eyeballer Front Light2 x Interchangeable straps for bars 22-27mm and 28-32mmQuick start guideFeaturesFront LED bike light15-degree angled beamIntegrated USB plug4-5 hours full charge timeLow level battery indicatorLight visible up to 1000mIncludes tool-free mounting system5 different light modes80 lumens maximum outputDimensions: 42 x 42 x 62mmWeighs 35gBuy Knog Lights from Chain Reaction Cycles, the World's Largest Online Bike Store.