Selle SMP Vulkor Ladyline SaddleSelle SMP Vulkor Ladyline Saddle is a female-specific saddle that offers a soft and durable natural leather cover, a full-length central channel and a long central cut out. Designed to offer outstanding pressure relief to sensitive parts, it also features a dropped “eagle’s beak” type nose and is at home on the road or off-road.Women's Road Saddle with Reinforced ShellThis saddle is constructed around a nylon/carbon fibre composite shell and boasts tough stainless steel rails. These combine to resist flexing forces and have been extensively tested to meet the requirements of the most stringent stability and resistance tests. Due to its lack of padding, the Vulkor Ladyline is ideally suited to seasoned female cyclists.Features:     Cover: Real leather     Casing: Nylon 12 reinforced with Carbon Fibre     Padding: None     Rails: Stainless steel AISI 304, 7.1mm     Dimensions: 266x136mm (LxW)     Recommended Use: Road racing, MTB, Triathlon     Weight: 235gBuy Selle SMP Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Selle SMP Nymber SaddleSelle SMP’s Nymber Saddle adopts the base from its racing-specific Vulkor model, but is equipped with comfortable and vibration dampening elastomer foam padding. This advanced padding helps you to offer consistent support on longer rides and over rougher ground.Endurance Road Saddle with Pressure ReliefBuilt around a tough and lightweight nylon/carbon fibre composite shell, the Nymber saddle provides the strength and rigidity you need for optimized power transfer. Also, to ensure you remain comfortable as the miles tick by, there’s a long central relief channel and a distinctive eagle’s beak type nose. These work together to remove pressure from the perineum. Features:  Cover: Real Leather  Padding: Foamed Elastomer  Shell: Nylon 12 reinforced with Carbon Fibre  Rail: Stainless steel AISI 304, 7.1mm  Dimensions: 267x139mm (LxW)  Cutout: Yes  Use: Road racing, MTB, Triathlon  Weight: 285gBuy Selle SMP Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Selle SMP Vulkor Ladyline SaddleSelle SMP Vulkor Ladyline Saddle is a female-specific saddle that offers a soft and durable natural leather cover, a full-length central channel and a long central cut out. Designed to offer outstanding pressure relief to sensitive parts, it also features a dropped “eagle’s beak” type nose and is at home on the road or off-road.Women's Road Saddle with Reinforced ShellThis saddle is constructed around a nylon/carbon fibre composite shell and boasts tough stainless steel rails. These combine to resist flexing forces and have been extensively tested to meet the requirements of the most stringent stability and resistance tests. Due to its lack of padding, the Vulkor Ladyline is ideally suited to seasoned female cyclists.Features:     Cover: Real leather     Casing: Nylon 12 reinforced with Carbon Fibre     Padding: None     Rails: Stainless steel AISI 304, 7.1mm     Dimensions: 266x136mm (LxW)     Recommended Use: Road racing, MTB, Triathlon     Weight: 235gBuy Selle SMP Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Selle SMP Vulkor SaddleOffering a full-length central channel, a long cut out and a soft and durable natural leather cover, Selle SMP’s Vulkor Saddle is the ideal choice for versatile and demanding cyclists. Designed to offer outstanding pressure relief to sensitive parts, it also features a dropped “eagle’s beak” type nose and is at home on the road or off-road.Carbon Fibre ReinforcedIt's constructed around a nylon/carbon fibre composite shell and boasts tough stainless steel rails. These combine to resist flexing forces and have been extensively tested to meet the requirements of the most stringent stability and resistance tests. Due to its lack of padding, the Vulkor is ideally suited to seasoned cyclists.Features:  Cover: Real leather  Casing: Nylon 12 reinforced with carbon fibre  Padding: None  Rails: Stainless steel AISI 304, 7.1mm  Dimensions: 266x136mm (LxW)  Recommended Use:Road racing, MTB, Triathlon  Weight: 235gBuy Selle SMP Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Selle SMP Vulkor SaddleOffering a full-length central channel, a long cut out and a soft and durable natural leather cover, Selle SMP’s Vulkor Saddle is the ideal choice for versatile and demanding cyclists. Designed to offer outstanding pressure relief to sensitive parts, it also features a dropped “eagle’s beak” type nose and is at home on the road or off-road.Carbon Fibre ReinforcedIt's constructed around a nylon/carbon fibre composite shell and boasts tough stainless steel rails. These combine to resist flexing forces and have been extensively tested to meet the requirements of the most stringent stability and resistance tests. Due to its lack of padding, the Vulkor is ideally suited to seasoned cyclists.Features:  Cover: Real leather  Casing: Nylon 12 reinforced with carbon fibre  Padding: None  Rails: Stainless steel AISI 304, 7.1mm  Dimensions: 266x136mm (LxW)  Recommended Use:Road racing, MTB, Triathlon  Weight: 235gBuy Selle SMP Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Selle SMP Vulkor SaddleOffering a full-length central channel, a long cut out and a soft and durable natural leather cover, Selle SMP’s Vulkor Saddle is the ideal choice for versatile and demanding cyclists. Designed to offer outstanding pressure relief to sensitive parts, it also features a dropped “eagle’s beak” type nose and is at home on the road or off-road.Carbon Fibre ReinforcedIt's constructed around a nylon/carbon fibre composite shell and boasts tough stainless steel rails. These combine to resist flexing forces and have been extensively tested to meet the requirements of the most stringent stability and resistance tests. Due to its lack of padding, the Vulkor is ideally suited to seasoned cyclists.Features:  Cover: Real leather  Casing: Nylon 12 reinforced with carbon fibre  Padding: None  Rails: Stainless steel AISI 304, 7.1mm  Dimensions: 266x136mm (LxW)  Recommended Use:Road racing, MTB, Triathlon  Weight: 235gBuy Selle SMP Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Selle SMP Vulkor SaddleOffering a full-length central channel, a long cut out and a soft and durable natural leather cover, Selle SMP’s Vulkor Saddle is the ideal choice for versatile and demanding cyclists. Designed to offer outstanding pressure relief to sensitive parts, it also features a dropped “eagle’s beak” type nose and is at home on the road or off-road.Carbon Fibre ReinforcedIt's constructed around a nylon/carbon fibre composite shell and boasts tough stainless steel rails. These combine to resist flexing forces and have been extensively tested to meet the requirements of the most stringent stability and resistance tests. Due to its lack of padding, the Vulkor is ideally suited to seasoned cyclists.Features:  Cover: Real leather  Casing: Nylon 12 reinforced with carbon fibre  Padding: None  Rails: Stainless steel AISI 304, 7.1mm  Dimensions: 266x136mm (LxW)  Recommended Use:Road racing, MTB, Triathlon  Weight: 235gBuy Selle SMP Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Selle SMP Vulkor SaddleOffering a full-length central channel, a long cut out and a soft and durable natural leather cover, Selle SMP’s Vulkor Saddle is the ideal choice for versatile and demanding cyclists. Designed to offer outstanding pressure relief to sensitive parts, it also features a dropped “eagle’s beak” type nose and is at home on the road or off-road.Carbon Fibre ReinforcedIt's constructed around a nylon/carbon fibre composite shell and boasts tough stainless steel rails. These combine to resist flexing forces and have been extensively tested to meet the requirements of the most stringent stability and resistance tests. Due to its lack of padding, the Vulkor is ideally suited to seasoned cyclists.Features:  Cover: Real leather  Casing: Nylon 12 reinforced with carbon fibre  Padding: None  Rails: Stainless steel AISI 304, 7.1mm  Dimensions: 266x136mm (LxW)  Recommended Use:Road racing, MTB, Triathlon  Weight: 235gBuy Selle SMP Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Selle SMP Vulkor SaddleOffering a full-length central channel, a long cut out and a soft and durable natural leather cover, Selle SMP’s Vulkor Saddle is the ideal choice for versatile and demanding cyclists. Designed to offer outstanding pressure relief to sensitive parts, it also features a dropped “eagle’s beak” type nose and is at home on the road or off-road.Carbon Fibre ReinforcedIt's constructed around a nylon/carbon fibre composite shell and boasts tough stainless steel rails. These combine to resist flexing forces and have been extensively tested to meet the requirements of the most stringent stability and resistance tests. Due to its lack of padding, the Vulkor is ideally suited to seasoned cyclists.Features:  Cover: Real leather  Casing: Nylon 12 reinforced with carbon fibre  Padding: None  Rails: Stainless steel AISI 304, 7.1mm  Dimensions: 266x136mm (LxW)  Recommended Use:Road racing, MTB, Triathlon  Weight: 235gBuy Selle SMP Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Selle SMP Vulkor SaddleOffering a full-length central channel, a long cut out and a soft and durable natural leather cover, Selle SMP’s Vulkor Saddle is the ideal choice for versatile and demanding cyclists. Designed to offer outstanding pressure relief to sensitive parts, it also features a dropped “eagle’s beak” type nose and is at home on the road or off-road.Carbon Fibre ReinforcedIt's constructed around a nylon/carbon fibre composite shell and boasts tough stainless steel rails. These combine to resist flexing forces and have been extensively tested to meet the requirements of the most stringent stability and resistance tests. Due to its lack of padding, the Vulkor is ideally suited to seasoned cyclists.Features:  Cover: Real leather  Casing: Nylon 12 reinforced with carbon fibre  Padding: None  Rails: Stainless steel AISI 304, 7.1mm  Dimensions: 266x136mm (LxW)  Recommended Use:Road racing, MTB, Triathlon  Weight: 235gBuy Selle SMP Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Selle SMP Vulkor SaddleOffering a full-length central channel, a long cut out and a soft and durable natural leather cover, Selle SMP’s Vulkor Saddle is the ideal choice for versatile and demanding cyclists. Designed to offer outstanding pressure relief to sensitive parts, it also features a dropped “eagle’s beak” type nose and is at home on the road or off-road.Carbon Fibre ReinforcedIt's constructed around a nylon/carbon fibre composite shell and boasts tough stainless steel rails. These combine to resist flexing forces and have been extensively tested to meet the requirements of the most stringent stability and resistance tests. Due to its lack of padding, the Vulkor is ideally suited to seasoned cyclists.Features:  Cover: Real leather  Casing: Nylon 12 reinforced with carbon fibre  Padding: None  Rails: Stainless steel AISI 304, 7.1mm  Dimensions: 266x136mm (LxW)  Recommended Use:Road racing, MTB, Triathlon  Weight: 235gBuy Selle SMP Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Selle SMP Vulkor SaddleOffering a full-length central channel, a long cut out and a soft and durable natural leather cover, Selle SMP’s Vulkor Saddle is the ideal choice for versatile and demanding cyclists. Designed to offer outstanding pressure relief to sensitive parts, it also features a dropped “eagle’s beak” type nose and is at home on the road or off-road.Carbon Fibre ReinforcedIt's constructed around a nylon/carbon fibre composite shell and boasts tough stainless steel rails. These combine to resist flexing forces and have been extensively tested to meet the requirements of the most stringent stability and resistance tests. Due to its lack of padding, the Vulkor is ideally suited to seasoned cyclists.Features:  Cover: Real leather  Casing: Nylon 12 reinforced with carbon fibre  Padding: None  Rails: Stainless steel AISI 304, 7.1mm  Dimensions: 266x136mm (LxW)  Recommended Use:Road racing, MTB, Triathlon  Weight: 235gBuy Selle SMP Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Stages Power Meter G3 L - Stages Carbon BB30Ridden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and fits 30mm SRAM, Race Face Next SL, Easton & FSA 386EVO cranksets by way of appropriate Stages 30mm alloy spindles.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a  non-drive-side Stages Carbon crank arm and built to retrofit SRAM, Race Face, and Easton cranks with Stages Power, with an additional spindle purchase. No additional spindle purchase is required for FSA 386EVO cranks. The crank arm is also individually calibrated, which ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:  Accelerometer based cadence measurement     Wirelessly upgradable firmware     LED indicator displays battery level     Updated accelerometer and addition of gyroscope     Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength     Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter     Power Range (Watts): 0 to 5000     Cadence range (rpm): 10-220     Water Resistance Rating: IPX7  Weight: Only adds 20g to base crank armCompatibility:     Fits 30mm spindle BB30, OSBB and 386EVO bottom bracket standards by way of appropriate Stages 30mm alloy spindles (sold seperately)   Frame Compatibility: Most frames         Device Compatibility: ANT+, Bluetooth Smart ready      Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersStages Cycling spindles for 30mm are available in five options to purchase seperately:  For SRAM Red 22 BB30  For SRAM Force 22, Rival 22, Force/Rival CX1  For 2015 model/year or newer SRAM BB30 mountain cranks with a 9mm driveside spacer  For 2015 model/year or newer SRAM BB30 mountain cranks with a 15.5mm driveside spacerRace Face Next SLIn The Box:     Power meter     High-quality CR2032 coin cell battery     Product identification card with serial number and ANT+ I.D.     Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Stages Power Meter G3 L - Stages Carbon BB30Ridden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and fits 30mm SRAM, Race Face Next SL, Easton & FSA 386EVO cranksets by way of appropriate Stages 30mm alloy spindles.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a  non-drive-side Stages Carbon crank arm and built to retrofit SRAM, Race Face, and Easton cranks with Stages Power, with an additional spindle purchase. No additional spindle purchase is required for FSA 386EVO cranks. The crank arm is also individually calibrated, which ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:  Accelerometer based cadence measurement     Wirelessly upgradable firmware     LED indicator displays battery level     Updated accelerometer and addition of gyroscope     Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength     Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter     Power Range (Watts): 0 to 5000     Cadence range (rpm): 10-220     Water Resistance Rating: IPX7  Weight: Only adds 20g to base crank armCompatibility:     Fits 30mm spindle BB30, OSBB and 386EVO bottom bracket standards by way of appropriate Stages 30mm alloy spindles (sold seperately)   Frame Compatibility: Most frames         Device Compatibility: ANT+, Bluetooth Smart ready      Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersStages Cycling spindles for 30mm are available in five options to purchase seperately:  For SRAM Red 22 BB30  For SRAM Force 22, Rival 22, Force/Rival CX1  For 2015 model/year or newer SRAM BB30 mountain cranks with a 9mm driveside spacer  For 2015 model/year or newer SRAM BB30 mountain cranks with a 15.5mm driveside spacerRace Face Next SLIn The Box:     Power meter     High-quality CR2032 coin cell battery     Product identification card with serial number and ANT+ I.D.     Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Stages Power Meter G3 L - Stages Carbon BB30Ridden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and fits 30mm SRAM, Race Face Next SL, Easton & FSA 386EVO cranksets by way of appropriate Stages 30mm alloy spindles.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a  non-drive-side Stages Carbon crank arm and built to retrofit SRAM, Race Face, and Easton cranks with Stages Power, with an additional spindle purchase. No additional spindle purchase is required for FSA 386EVO cranks. The crank arm is also individually calibrated, which ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:  Accelerometer based cadence measurement     Wirelessly upgradable firmware     LED indicator displays battery level     Updated accelerometer and addition of gyroscope     Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength     Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter     Power Range (Watts): 0 to 5000     Cadence range (rpm): 10-220     Water Resistance Rating: IPX7  Weight: Only adds 20g to base crank armCompatibility:     Fits 30mm spindle BB30, OSBB and 386EVO bottom bracket standards by way of appropriate Stages 30mm alloy spindles (sold seperately)   Frame Compatibility: Most frames         Device Compatibility: ANT+, Bluetooth Smart ready      Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersStages Cycling spindles for 30mm are available in five options to purchase seperately:  For SRAM Red 22 BB30  For SRAM Force 22, Rival 22, Force/Rival CX1  For 2015 model/year or newer SRAM BB30 mountain cranks with a 9mm driveside spacer  For 2015 model/year or newer SRAM BB30 mountain cranks with a 15.5mm driveside spacerRace Face Next SLIn The Box:     Power meter     High-quality CR2032 coin cell battery     Product identification card with serial number and ANT+ I.D.     Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

?Boyau Vittoria Corsa Control G+ IsotechLe Pneu Vittoria Corsa Control G+ Isotech utilise un composé Graphène G+, une matière révolutionnaire 200 fois plus solide que l'acier et 6 fois plus légère. En matière de vitesse, adhérence, et durabilité ne sacrifie rien et en fait un des modèles les plus performant jamais créé ; il place la barre plus haut par rapport à ce que l'on peut attendre des pneus à chambre à air.Caractéristiques :  Gomme : Graphène+  Talon : boyau  Poids : 295 g (700 x 25c)Technologies :  Gomme Graphene : la gomme Graphene de Vittoria offre des performances supérieures de roulement, d'adhérence et de durabilité. Ce composé offre les avantages en termes de performances nécessaires à la compétition.  Gomme 4C : conçue et développée par Vittoria et atteint de hautes performances. Le 4C correspond à un processus de stratification de 4 gommes différentes dans le même bande de roulement. Le 4C offre une polyvalence inégalable de roulement au centre et sur les flancs de la bande. Le produit fini est soumis à des tests rigoureux pour répondre aux performances de haut niveau de compétition exigées par les cyclistes sur et hors route, en offrant une meilleure efficacité de roulement, une meilleure adhérence et une meilleure protection contre les crevaisons.Achetez vos roues et pneus Vittoria sur Chain Reaction Cycles, le plus grand magasin de vélo en ligne au monde.

Stages Cycling Power Meter G3 L - Campagnolo RecordRidden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and is designed for use with a Campagnolo Record or Chorus road drivetrain.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a Campagnolo Record non-drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:  Accelerometer based cadence measurement     Wirelessly upgradable firmware     LED indicator displays battery level     Updated accelerometer and addition of gyroscope     Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength     Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter     Power Range (Watts): 0 to 5000     Cadence range (rpm): 10-220     Water Resistance Rating: IPX7  Weight: Only adds 20g to base crank armCompatibility:     Only meant for use with a drive side Campagnolo Record or Chorus crank arm.  It will NOT fit Campagnolo Super Record cranksets   Frame Compatibility: Most frames         Device Compatibility: ANT+, Bluetooth Smart ready      Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box:     Power meter     High-quality CR2032 coin cell battery     Product identification card with serial number and ANT+ I.D.     Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Stages Cycling Power Meter G3 L Campagnolo Super RecordRidden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and is specifcally designed for use with a Campagnolo Super Record road drivetrain.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a Campagnolo Super Record non-drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:  Accelerometer based cadence measurement     Wirelessly upgradable firmware     LED indicator displays battery level     Updated accelerometer and addition of gyroscope     Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength     Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter     Power Range (Watts): 0 to 5000     Cadence range (rpm): 10-220     Water Resistance Rating: IPX7  Weight: Only adds 20g to base crank armCompatibility:     Only meant for use along with a drive side Campagnolo Super Record crank arm   Frame Compatibility: Most frames         Device Compatibility: ANT+, Bluetooth Smart ready      Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box:     Power meter     High-quality CR2032 coin cell battery     Product identification card with serial number and ANT+ I.D.     Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Stages Cycling Power Meter G3 L - Campagnolo RecordRidden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and is designed for use with a Campagnolo Record or Chorus road drivetrain.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a Campagnolo Record non-drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:  Accelerometer based cadence measurement     Wirelessly upgradable firmware     LED indicator displays battery level     Updated accelerometer and addition of gyroscope     Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength     Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter     Power Range (Watts): 0 to 5000     Cadence range (rpm): 10-220     Water Resistance Rating: IPX7  Weight: Only adds 20g to base crank armCompatibility:     Only meant for use with a drive side Campagnolo Record or Chorus crank arm.  It will NOT fit Campagnolo Super Record cranksets   Frame Compatibility: Most frames         Device Compatibility: ANT+, Bluetooth Smart ready      Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box:     Power meter     High-quality CR2032 coin cell battery     Product identification card with serial number and ANT+ I.D.     Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Stages Cycling Power Meter G3 L Campagnolo Super RecordRidden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and is specifcally designed for use with a Campagnolo Super Record road drivetrain.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a Campagnolo Super Record non-drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:  Accelerometer based cadence measurement     Wirelessly upgradable firmware     LED indicator displays battery level     Updated accelerometer and addition of gyroscope     Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength     Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter     Power Range (Watts): 0 to 5000     Cadence range (rpm): 10-220     Water Resistance Rating: IPX7  Weight: Only adds 20g to base crank armCompatibility:     Only meant for use along with a drive side Campagnolo Super Record crank arm   Frame Compatibility: Most frames         Device Compatibility: ANT+, Bluetooth Smart ready      Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box:     Power meter     High-quality CR2032 coin cell battery     Product identification card with serial number and ANT+ I.D.     Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.