Thomson Road Alloy DropBar Aero ProfileThese Road Alloy DropBars with an Aero Profile bring you the race-proven flat upper sections as seen on Thomson's carbon fibre model. This design gives you increased comfort and efficiency and at a slightly more affordable price point. Thomson gave them a long drop of 148mm and a reach of 89mm to make them perfect for racing use.Multi-Position ComfortWith its small top section that allows ease of hand movement into different positions and cable indents to tuck away the outer cables when taped up, these bars are built for the long haul. They're manufactured from high-quality 7000-series aluminium to give you the reliability and outstanding performance that has Thomson is known for.Features:  Material: 7000 series Aluminium  Clamp: 31.8mm  Reach: 89mm  Drop: 148mm  Cable indents for outer cable  Each profile exceeds the ISO 4210-2:2015 safety requirementBuy Thomson Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Seal BMX Switch BarsMade from extra strong 1020 hi-ten steel, the Switch Bars from Seal BMX feature a classic two-piece design with a comfortable 9 rise, 10 ° backsweep and 2 ° upsweep.Features:Material: 1020 hi-ten SteelRise: 9Backsweep: 10 °Backsweep: 2 °Extra strong two-piece handlebarsBuy Seal BMX Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Seal BMX Switch BarsMade from extra strong 1020 hi-ten steel, the Switch Bars from Seal BMX feature a classic two-piece design with a comfortable 9 rise, 10 ° backsweep and 2 ° upsweep.Features:Material: 1020 hi-ten SteelRise: 9Backsweep: 10 °Backsweep: 2 °Extra strong two-piece handlebarsBuy Seal BMX Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Animal Bikes Empire BMX BarsThe Empire Bars from Animal Bikes are the Colin Varanyak's signature model and their height and geometry have been tuned to his exacting standards. Featuring a multi-butted CrMo construction in a 2-piece design, these Empire Bars provide outstanding rigidity for precise steering and control.Features Material: Multi-Butted CrMo, post-weld heat-treated 2-piece design Backsweep: 12° Upsweep: 1° Crossbar Height: 7 Crossbar Width:11.5Buy Animal Bikes Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Animal Bikes Empire BMX BarsThe Empire Bars from Animal Bikes are the Colin Varanyak's signature model and their height and geometry have been tuned to his exacting standards. Featuring a multi-butted CrMo construction in a 2-piece design, these Empire Bars provide outstanding rigidity for precise steering and control.Features Material: Multi-Butted CrMo, post-weld heat-treated 2-piece design Backsweep: 12° Upsweep: 1° Crossbar Height: 7 Crossbar Width:11.5Buy Animal Bikes Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Animal Bikes Foursome BMX BarsThe Animal Bikes Foursome BMX Bars are the ideal option for those who hold nothing back when riding, as their 4-piece design is constructed from high-quality butted CrMo, which is also heat treated for extra strength and durability.Features Material: Butted CrMo, post-weld heat-treated 4-piece design Backsweep: 11° Upsweep: 5° Crossbar Height: 6 Crossbar Width: 10Buy Animal Bikes Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Animal Bikes Foursome BMX BarsThe Animal Bikes Foursome BMX Bars are the ideal option for those who hold nothing back when riding, as their 4-piece design is constructed from high-quality butted CrMo, which is also heat treated for extra strength and durability.Features Material: Butted CrMo, post-weld heat-treated 4-piece design Backsweep: 11° Upsweep: 5° Crossbar Height: 6 Crossbar Width: 10Buy Animal Bikes Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

?Cintre 3T Tornova Pro (aluminium)Pour que vous restiez à l'aise et confortable tout au long de la journée, ce cintre ergonomique de 3T utilise sa construction en aluminium et ses angles dynamiques pour vous garder en position afin de profiter au maximum de la course. Conçu avec une inclinaison de 123 mm et une portée de 77 mm, il est facile de trouver le meilleur endroit avec la tête baissée, tandis que la section centrale ovale donne une position naturelle des mains pour rouler droit. Avec un canal spécial sur la face inférieure pour garder vos câbles cachés, ce cintre moderne est bien équipé pour prendre la route. Caractéristiques : Matériau : AL7075 aluminium Inclinaison : 123 mm Portée : 77 mm Diamètre de la fixation : 31,8 mm Poids : 265 g (environ) Achetez des composants 3T sur Chain Reaction Cycles, le plus grand magasin de vélo en ligne au monde.

Deda Elementi Velocita Track HandlebarA stunning-looking sprint bar by Deda Elementi, the Velocita will have you lighting up the track in style. Made from a stiff and durable CrMo, this polished drop bar keeps a narrow form for a streamlined attack on every race. Featuring a deep 173mm drop and lengthy 109mm reach, finding a comfortable and aerodynamic position is made easy, ensuring you stay focused on shaving those vital seconds. Features: Material: CrMo Finish: Polished CrMo Bar Clamp Diameter: 31.7mm Reach: 109mm Drop: 173mm Width: 42cm Weight: 676gBuy Deda Elementi Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Pro Vibe 7s Team Sky Compact HandlebarThe Vibe 7s Compact Handlebars are the ultimate lightweight and strong aluminium road racing drop handlebars. Made from 7075 aluminium, which is commonly used in the aircraft industry, and featuring oversized 31.8mm tubing the V7s handlebar reduces unwanted flex under load by increasing strength and rigidity.This special edition Team Sky handlebar celebrates Pro's collaboration with Team Sky and features their iconic blue on black theme. Features: Limited edition Team Sky replica Lightweight and strong 7075 aluminium road racing drop handlebar, for oversized 31.8mm clamp diameter 7075 aluminium is a high strength aluminium alloy commonly used in the aircraft industry making it the ideal choice to produce this lightweight, strong and rigid handlebar Oversized 31.8mm clamp diameter reduces unwanted flex under high load by increasing strength and rigidity For further rigidity the 31.8mm diameter is carried across the top of the bar, keeping the strength where it is needed and reducing the wall thickness where vital grams can be saved Compact handlebar design gives a comfortable choice of handlebar positions Dual recessed groove cable routingWeight: 285gBuy Pro Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Truvativ Descendant CoLab Carbon Handlebar - TLDTruvativ's Descendant CoLab Handlebars feature distinctive Troy Lee Designs logos and benefit from Truvativ's ultimate race-winning geometry, which was created with the help of Championship winning Enduro riders. Their 20mm of rise helps to put you in a comfortable yet controlled position. Also, with the bars stiff but lightweight carbon fibre construction, you'll enjoy precise and reliable handling as you blast round the berms and through the switchbacks.Features: Material: Carbon Fibre Rise: 20mm Upsweep: 5 degrees Backsweep: 7 degrees Bar clamp diameter: 31.8mm Usage: All mountain Matching RockShox sticker pack includedBuy Truvativ Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Spank Spike 800 Race BarThe Spank Spike 800 Race Bar is now in its 6th generation and this version offers you World Cup quality performance without breaking the bank. Spank industries developed this bar along with some of the world's top DH and Enduro pros and utilised a unique construction of Super-6 aluminium, Spank's patented CNC bending, and their Dual-Extreme-Gradual Taper (XGT) technology.Performance Optimised Race BarThe result of this collaboration and advanced construction has resulted in a handlebar that is stronger, safer and performance optimised. The Spank Spike 800 Race has an ideal geometry for control and a low weight, making it perfect for aggressive All Mountain, Enduro or Downhill Racing.Features: Material: Super Six MGR Aluminium with CNC bending Finish: Shotpeen anodised, decal logos Dual XGT taper technology with impact ends Diameter: 31.8mm Upsweep: 4° Backsweep: 8° Length: 800mm (can be cut to 740mm) Usage: Enduro, Freeride Weight: From 300g (15mm rise version)Technologies:Dual XGT (Extreme Gradual Taper) Technology: This is a proprietary tube drawing process that tapers the bars from the thickest area at the bar clamping zone, slowly and gradually through the bend zones, to the thinnest areas at the control zones and back to thicker reinforced bar end zones, or “Impact Ends”. Spank has utilized FEA (Finite Element Analysis), laboratory, and rigorous real world testing to optimise the spread of material to where it is needed to withstand the specific forces at work in each zone, while offering better protection against crashes than ever before! The extreme precision enabled by Dual XGT drawing processes also eliminates the need for heavy hand grinding, which can result in imperfections and inconsistency in wall thickness.Impact Ends: The Impact Ends reduce the chance of collapse in areas where the wall is thinner and in heavy impacts. These can also be used to support bar ends in the relevant disciplinesCNC Bending: The precision of 3D CNC Bending in a single fixture allows Spank to optimise their designs further and to eliminate the heavy grinding process, making their bars lighter, stronger, and safer! Spank has also taken extra work hardening steps to ensure the stem clamping area of the bar is uniformly cylindrical and true, and as tough as possibleSuper-6 Aluminium: This is a specially blended, highly magnesium-silicon enriched, work hardened alloy. Super-6 offers the perfect mix of hardness, yield, fatigue life, and a superior ultimate tensile strength to standard 6 series alloys. It is ideal for the creation of thin walled, super stiff handlebars. Through recent adoption of Super-6 materials, Spank’s Spike, Subrosa, and Oozy handlebars are now stronger and show greater resistance to deformation than ever before!Buy Spank Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Spank Spike 800 Race BarThe Spank Spike 800 Race Bar is now in its 6th generation and this version offers you World Cup quality performance without breaking the bank. Spank industries developed this bar along with some of the world's top DH and Enduro pros and utilised a unique construction of Super-6 aluminium, Spank's patented CNC bending, and their Dual-Extreme-Gradual Taper (XGT) technology.Performance Optimised Race BarThe result of this collaboration and advanced construction has resulted in a handlebar that is stronger, safer and performance optimised. The Spank Spike 800 Race has an ideal geometry for control and a low weight, making it perfect for aggressive All Mountain, Enduro or Downhill Racing.Features: Material: Super Six MGR Aluminium with CNC bending Finish: Shotpeen anodised, decal logos Dual XGT taper technology with impact ends Diameter: 31.8mm Upsweep: 4° Backsweep: 8° Length: 800mm (can be cut to 740mm) Usage: Enduro, Freeride Weight: From 300g (15mm rise version)Technologies:Dual XGT (Extreme Gradual Taper) Technology: This is a proprietary tube drawing process that tapers the bars from the thickest area at the bar clamping zone, slowly and gradually through the bend zones, to the thinnest areas at the control zones and back to thicker reinforced bar end zones, or “Impact Ends”. Spank has utilized FEA (Finite Element Analysis), laboratory, and rigorous real world testing to optimise the spread of material to where it is needed to withstand the specific forces at work in each zone, while offering better protection against crashes than ever before! The extreme precision enabled by Dual XGT drawing processes also eliminates the need for heavy hand grinding, which can result in imperfections and inconsistency in wall thickness.Impact Ends: The Impact Ends reduce the chance of collapse in areas where the wall is thinner and in heavy impacts. These can also be used to support bar ends in the relevant disciplinesCNC Bending: The precision of 3D CNC Bending in a single fixture allows Spank to optimise their designs further and to eliminate the heavy grinding process, making their bars lighter, stronger, and safer! Spank has also taken extra work hardening steps to ensure the stem clamping area of the bar is uniformly cylindrical and true, and as tough as possibleSuper-6 Aluminium: This is a specially blended, highly magnesium-silicon enriched, work hardened alloy. Super-6 offers the perfect mix of hardness, yield, fatigue life, and a superior ultimate tensile strength to standard 6 series alloys. It is ideal for the creation of thin walled, super stiff handlebars. Through recent adoption of Super-6 materials, Spank’s Spike, Subrosa, and Oozy handlebars are now stronger and show greater resistance to deformation than ever before!Buy Spank Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Spank Spike 800 Race BarThe Spank Spike 800 Race Bar is now in its 6th generation and this version offers you World Cup quality performance without breaking the bank. Spank industries developed this bar along with some of the world's top DH and Enduro pros and utilised a unique construction of Super-6 aluminium, Spank's patented CNC bending, and their Dual-Extreme-Gradual Taper (XGT) technology.Performance Optimised Race BarThe result of this collaboration and advanced construction has resulted in a handlebar that is stronger, safer and performance optimised. The Spank Spike 800 Race has an ideal geometry for control and a low weight, making it perfect for aggressive All Mountain, Enduro or Downhill Racing.Features: Material: Super Six MGR Aluminium with CNC bending Finish: Shotpeen anodised, decal logos Dual XGT taper technology with impact ends Diameter: 31.8mm Upsweep: 4° Backsweep: 8° Length: 800mm (can be cut to 740mm) Usage: Enduro, Freeride Weight: From 300g (15mm rise version)Technologies:Dual XGT (Extreme Gradual Taper) Technology: This is a proprietary tube drawing process that tapers the bars from the thickest area at the bar clamping zone, slowly and gradually through the bend zones, to the thinnest areas at the control zones and back to thicker reinforced bar end zones, or “Impact Ends”. Spank has utilized FEA (Finite Element Analysis), laboratory, and rigorous real world testing to optimise the spread of material to where it is needed to withstand the specific forces at work in each zone, while offering better protection against crashes than ever before! The extreme precision enabled by Dual XGT drawing processes also eliminates the need for heavy hand grinding, which can result in imperfections and inconsistency in wall thickness.Impact Ends: The Impact Ends reduce the chance of collapse in areas where the wall is thinner and in heavy impacts. These can also be used to support bar ends in the relevant disciplinesCNC Bending: The precision of 3D CNC Bending in a single fixture allows Spank to optimise their designs further and to eliminate the heavy grinding process, making their bars lighter, stronger, and safer! Spank has also taken extra work hardening steps to ensure the stem clamping area of the bar is uniformly cylindrical and true, and as tough as possibleSuper-6 Aluminium: This is a specially blended, highly magnesium-silicon enriched, work hardened alloy. Super-6 offers the perfect mix of hardness, yield, fatigue life, and a superior ultimate tensile strength to standard 6 series alloys. It is ideal for the creation of thin walled, super stiff handlebars. Through recent adoption of Super-6 materials, Spank’s Spike, Subrosa, and Oozy handlebars are now stronger and show greater resistance to deformation than ever before!Buy Spank Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Spank Spike 800 Race BarThe Spank Spike 800 Race Bar is now in its 6th generation and this version offers you World Cup quality performance without breaking the bank. Spank industries developed this bar along with some of the world's top DH and Enduro pros and utilised a unique construction of Super-6 aluminium, Spank's patented CNC bending, and their Dual-Extreme-Gradual Taper (XGT) technology.Performance Optimised Race BarThe result of this collaboration and advanced construction has resulted in a handlebar that is stronger, safer and performance optimised. The Spank Spike 800 Race has an ideal geometry for control and a low weight, making it perfect for aggressive All Mountain, Enduro or Downhill Racing.Features: Material: Super Six MGR Aluminium with CNC bending Finish: Shotpeen anodised, decal logos Dual XGT taper technology with impact ends Diameter: 31.8mm Upsweep: 4° Backsweep: 8° Length: 800mm (can be cut to 740mm) Usage: Enduro, Freeride Weight: From 300g (15mm rise version)Technologies:Dual XGT (Extreme Gradual Taper) Technology: This is a proprietary tube drawing process that tapers the bars from the thickest area at the bar clamping zone, slowly and gradually through the bend zones, to the thinnest areas at the control zones and back to thicker reinforced bar end zones, or “Impact Ends”. Spank has utilized FEA (Finite Element Analysis), laboratory, and rigorous real world testing to optimise the spread of material to where it is needed to withstand the specific forces at work in each zone, while offering better protection against crashes than ever before! The extreme precision enabled by Dual XGT drawing processes also eliminates the need for heavy hand grinding, which can result in imperfections and inconsistency in wall thickness.Impact Ends: The Impact Ends reduce the chance of collapse in areas where the wall is thinner and in heavy impacts. These can also be used to support bar ends in the relevant disciplinesCNC Bending: The precision of 3D CNC Bending in a single fixture allows Spank to optimise their designs further and to eliminate the heavy grinding process, making their bars lighter, stronger, and safer! Spank has also taken extra work hardening steps to ensure the stem clamping area of the bar is uniformly cylindrical and true, and as tough as possibleSuper-6 Aluminium: This is a specially blended, highly magnesium-silicon enriched, work hardened alloy. Super-6 offers the perfect mix of hardness, yield, fatigue life, and a superior ultimate tensile strength to standard 6 series alloys. It is ideal for the creation of thin walled, super stiff handlebars. Through recent adoption of Super-6 materials, Spank’s Spike, Subrosa, and Oozy handlebars are now stronger and show greater resistance to deformation than ever before!Buy Spank Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Spank Spike 800 Race BarThe Spank Spike 800 Race Bar is now in its 6th generation and this version offers you World Cup quality performance without breaking the bank. Spank industries developed this bar along with some of the world's top DH and Enduro pros and utilised a unique construction of Super-6 aluminium, Spank's patented CNC bending, and their Dual-Extreme-Gradual Taper (XGT) technology.Performance Optimised Race BarThe result of this collaboration and advanced construction has resulted in a handlebar that is stronger, safer and performance optimised. The Spank Spike 800 Race has an ideal geometry for control and a low weight, making it perfect for aggressive All Mountain, Enduro or Downhill Racing.Features: Material: Super Six MGR Aluminium with CNC bending Finish: Shotpeen anodised, decal logos Dual XGT taper technology with impact ends Diameter: 31.8mm Upsweep: 4° Backsweep: 8° Length: 800mm (can be cut to 740mm) Usage: Enduro, Freeride Weight: From 300g (15mm rise version)Technologies:Dual XGT (Extreme Gradual Taper) Technology: This is a proprietary tube drawing process that tapers the bars from the thickest area at the bar clamping zone, slowly and gradually through the bend zones, to the thinnest areas at the control zones and back to thicker reinforced bar end zones, or “Impact Ends”. Spank has utilized FEA (Finite Element Analysis), laboratory, and rigorous real world testing to optimise the spread of material to where it is needed to withstand the specific forces at work in each zone, while offering better protection against crashes than ever before! The extreme precision enabled by Dual XGT drawing processes also eliminates the need for heavy hand grinding, which can result in imperfections and inconsistency in wall thickness.Impact Ends: The Impact Ends reduce the chance of collapse in areas where the wall is thinner and in heavy impacts. These can also be used to support bar ends in the relevant disciplinesCNC Bending: The precision of 3D CNC Bending in a single fixture allows Spank to optimise their designs further and to eliminate the heavy grinding process, making their bars lighter, stronger, and safer! Spank has also taken extra work hardening steps to ensure the stem clamping area of the bar is uniformly cylindrical and true, and as tough as possibleSuper-6 Aluminium: This is a specially blended, highly magnesium-silicon enriched, work hardened alloy. Super-6 offers the perfect mix of hardness, yield, fatigue life, and a superior ultimate tensile strength to standard 6 series alloys. It is ideal for the creation of thin walled, super stiff handlebars. Through recent adoption of Super-6 materials, Spank’s Spike, Subrosa, and Oozy handlebars are now stronger and show greater resistance to deformation than ever before!Buy Spank Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Spank Spike 800 Race BarThe Spank Spike 800 Race Bar is now in its 6th generation and this version offers you World Cup quality performance without breaking the bank. Spank industries developed this bar along with some of the world's top DH and Enduro pros and utilised a unique construction of Super-6 aluminium, Spank's patented CNC bending, and their Dual-Extreme-Gradual Taper (XGT) technology.Performance Optimised Race BarThe result of this collaboration and advanced construction has resulted in a handlebar that is stronger, safer and performance optimised. The Spank Spike 800 Race has an ideal geometry for control and a low weight, making it perfect for aggressive All Mountain, Enduro or Downhill Racing.Features: Material: Super Six MGR Aluminium with CNC bending Finish: Shotpeen anodised, decal logos Dual XGT taper technology with impact ends Diameter: 31.8mm Upsweep: 4° Backsweep: 8° Length: 800mm (can be cut to 740mm) Usage: Enduro, Freeride Weight: From 300g (15mm rise version)Technologies:Dual XGT (Extreme Gradual Taper) Technology: This is a proprietary tube drawing process that tapers the bars from the thickest area at the bar clamping zone, slowly and gradually through the bend zones, to the thinnest areas at the control zones and back to thicker reinforced bar end zones, or “Impact Ends”. Spank has utilized FEA (Finite Element Analysis), laboratory, and rigorous real world testing to optimise the spread of material to where it is needed to withstand the specific forces at work in each zone, while offering better protection against crashes than ever before! The extreme precision enabled by Dual XGT drawing processes also eliminates the need for heavy hand grinding, which can result in imperfections and inconsistency in wall thickness.Impact Ends: The Impact Ends reduce the chance of collapse in areas where the wall is thinner and in heavy impacts. These can also be used to support bar ends in the relevant disciplinesCNC Bending: The precision of 3D CNC Bending in a single fixture allows Spank to optimise their designs further and to eliminate the heavy grinding process, making their bars lighter, stronger, and safer! Spank has also taken extra work hardening steps to ensure the stem clamping area of the bar is uniformly cylindrical and true, and as tough as possibleSuper-6 Aluminium: This is a specially blended, highly magnesium-silicon enriched, work hardened alloy. Super-6 offers the perfect mix of hardness, yield, fatigue life, and a superior ultimate tensile strength to standard 6 series alloys. It is ideal for the creation of thin walled, super stiff handlebars. Through recent adoption of Super-6 materials, Spank’s Spike, Subrosa, and Oozy handlebars are now stronger and show greater resistance to deformation than ever before!Buy Spank Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Spank Spike 800 Race BarThe Spank Spike 800 Race Bar is now in its 6th generation and this version offers you World Cup quality performance without breaking the bank. Spank industries developed this bar along with some of the world's top DH and Enduro pros and utilised a unique construction of Super-6 aluminium, Spank's patented CNC bending, and their Dual-Extreme-Gradual Taper (XGT) technology.Performance Optimised Race BarThe result of this collaboration and advanced construction has resulted in a handlebar that is stronger, safer and performance optimised. The Spank Spike 800 Race has an ideal geometry for control and a low weight, making it perfect for aggressive All Mountain, Enduro or Downhill Racing.Features: Material: Super Six MGR Aluminium with CNC bending Finish: Shotpeen anodised, decal logos Dual XGT taper technology with impact ends Diameter: 31.8mm Upsweep: 4° Backsweep: 8° Length: 800mm (can be cut to 740mm) Usage: Enduro, Freeride Weight: From 300g (15mm rise version)Technologies:Dual XGT (Extreme Gradual Taper) Technology: This is a proprietary tube drawing process that tapers the bars from the thickest area at the bar clamping zone, slowly and gradually through the bend zones, to the thinnest areas at the control zones and back to thicker reinforced bar end zones, or “Impact Ends”. Spank has utilized FEA (Finite Element Analysis), laboratory, and rigorous real world testing to optimise the spread of material to where it is needed to withstand the specific forces at work in each zone, while offering better protection against crashes than ever before! The extreme precision enabled by Dual XGT drawing processes also eliminates the need for heavy hand grinding, which can result in imperfections and inconsistency in wall thickness.Impact Ends: The Impact Ends reduce the chance of collapse in areas where the wall is thinner and in heavy impacts. These can also be used to support bar ends in the relevant disciplinesCNC Bending: The precision of 3D CNC Bending in a single fixture allows Spank to optimise their designs further and to eliminate the heavy grinding process, making their bars lighter, stronger, and safer! Spank has also taken extra work hardening steps to ensure the stem clamping area of the bar is uniformly cylindrical and true, and as tough as possibleSuper-6 Aluminium: This is a specially blended, highly magnesium-silicon enriched, work hardened alloy. Super-6 offers the perfect mix of hardness, yield, fatigue life, and a superior ultimate tensile strength to standard 6 series alloys. It is ideal for the creation of thin walled, super stiff handlebars. Through recent adoption of Super-6 materials, Spank’s Spike, Subrosa, and Oozy handlebars are now stronger and show greater resistance to deformation than ever before!Buy Spank Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Spank Spike 800 Race BarThe Spank Spike 800 Race Bar is now in its 6th generation and this version offers you World Cup quality performance without breaking the bank. Spank industries developed this bar along with some of the world's top DH and Enduro pros and utilised a unique construction of Super-6 aluminium, Spank's patented CNC bending, and their Dual-Extreme-Gradual Taper (XGT) technology.Performance Optimised Race BarThe result of this collaboration and advanced construction has resulted in a handlebar that is stronger, safer and performance optimised. The Spank Spike 800 Race has an ideal geometry for control and a low weight, making it perfect for aggressive All Mountain, Enduro or Downhill Racing.Features: Material: Super Six MGR Aluminium with CNC bending Finish: Shotpeen anodised, decal logos Dual XGT taper technology with impact ends Diameter: 31.8mm Upsweep: 4° Backsweep: 8° Length: 800mm (can be cut to 740mm) Usage: Enduro, Freeride Weight: From 300g (15mm rise version)Technologies:Dual XGT (Extreme Gradual Taper) Technology: This is a proprietary tube drawing process that tapers the bars from the thickest area at the bar clamping zone, slowly and gradually through the bend zones, to the thinnest areas at the control zones and back to thicker reinforced bar end zones, or “Impact Ends”. Spank has utilized FEA (Finite Element Analysis), laboratory, and rigorous real world testing to optimise the spread of material to where it is needed to withstand the specific forces at work in each zone, while offering better protection against crashes than ever before! The extreme precision enabled by Dual XGT drawing processes also eliminates the need for heavy hand grinding, which can result in imperfections and inconsistency in wall thickness.Impact Ends: The Impact Ends reduce the chance of collapse in areas where the wall is thinner and in heavy impacts. These can also be used to support bar ends in the relevant disciplinesCNC Bending: The precision of 3D CNC Bending in a single fixture allows Spank to optimise their designs further and to eliminate the heavy grinding process, making their bars lighter, stronger, and safer! Spank has also taken extra work hardening steps to ensure the stem clamping area of the bar is uniformly cylindrical and true, and as tough as possibleSuper-6 Aluminium: This is a specially blended, highly magnesium-silicon enriched, work hardened alloy. Super-6 offers the perfect mix of hardness, yield, fatigue life, and a superior ultimate tensile strength to standard 6 series alloys. It is ideal for the creation of thin walled, super stiff handlebars. Through recent adoption of Super-6 materials, Spank’s Spike, Subrosa, and Oozy handlebars are now stronger and show greater resistance to deformation than ever before!Buy Spank Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Spank Spike 800 Race BarThe Spank Spike 800 Race Bar is now in its 6th generation and this version offers you World Cup quality performance without breaking the bank. Spank industries developed this bar along with some of the world's top DH and Enduro pros and utilised a unique construction of Super-6 aluminium, Spank's patented CNC bending, and their Dual-Extreme-Gradual Taper (XGT) technology.Performance Optimised Race BarThe result of this collaboration and advanced construction has resulted in a handlebar that is stronger, safer and performance optimised. The Spank Spike 800 Race has an ideal geometry for control and a low weight, making it perfect for aggressive All Mountain, Enduro or Downhill Racing.Features: Material: Super Six MGR Aluminium with CNC bending Finish: Shotpeen anodised, decal logos Dual XGT taper technology with impact ends Diameter: 31.8mm Upsweep: 4° Backsweep: 8° Length: 800mm (can be cut to 740mm) Usage: Enduro, Freeride Weight: From 300g (15mm rise version)Technologies:Dual XGT (Extreme Gradual Taper) Technology: This is a proprietary tube drawing process that tapers the bars from the thickest area at the bar clamping zone, slowly and gradually through the bend zones, to the thinnest areas at the control zones and back to thicker reinforced bar end zones, or “Impact Ends”. Spank has utilized FEA (Finite Element Analysis), laboratory, and rigorous real world testing to optimise the spread of material to where it is needed to withstand the specific forces at work in each zone, while offering better protection against crashes than ever before! The extreme precision enabled by Dual XGT drawing processes also eliminates the need for heavy hand grinding, which can result in imperfections and inconsistency in wall thickness.Impact Ends: The Impact Ends reduce the chance of collapse in areas where the wall is thinner and in heavy impacts. These can also be used to support bar ends in the relevant disciplinesCNC Bending: The precision of 3D CNC Bending in a single fixture allows Spank to optimise their designs further and to eliminate the heavy grinding process, making their bars lighter, stronger, and safer! Spank has also taken extra work hardening steps to ensure the stem clamping area of the bar is uniformly cylindrical and true, and as tough as possibleSuper-6 Aluminium: This is a specially blended, highly magnesium-silicon enriched, work hardened alloy. Super-6 offers the perfect mix of hardness, yield, fatigue life, and a superior ultimate tensile strength to standard 6 series alloys. It is ideal for the creation of thin walled, super stiff handlebars. Through recent adoption of Super-6 materials, Spank’s Spike, Subrosa, and Oozy handlebars are now stronger and show greater resistance to deformation than ever before!Buy Spank Components from Chain Reaction Cycles, the World's Largest Online Bike Store.