Stages Cycling Dash – 31.8mm Out Front MountMade from extreme strength aluminium to ensure that your Stages Cycling Dash GPS stay where it needs to be, this Out Front Mount is perfect for all riders whether they’re fans of the road, cyclecross or the trail. It allows portrait or landscape views, is surprisingly lightweight at just 28g and is durable enough to withstand an extraordinary amount of punishment across a wide range of terrains.Features:Made from aluminiumWeighs 28gAllows landscape as well as portrait viewsHas a 31.8mm handlebar compatibilityCan be used for road, cyclocross, and MTB XCBuy Stages Cycling Electronics from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Cycling Power Meter G3 L - FSA SL-K BB30Ridden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any FSA or Vision BB30 road drivetrain.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a FSA SL-K BB30 crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features: Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter Power Range (Watts): 0 to 5000 Cadence range (rpm): 10-220 Water Resistance Rating: IPX7 Weight: Only adds 20g to base crank armCompatibility: Across the board compatibility with FSA and Vision BB30 models Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box: Power meter High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Cycling Power Meter G3 L - FSA SL-K BB30Ridden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any FSA or Vision BB30 road drivetrain.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a FSA SL-K BB30 crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features: Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter Power Range (Watts): 0 to 5000 Cadence range (rpm): 10-220 Water Resistance Rating: IPX7 Weight: Only adds 20g to base crank armCompatibility: Across the board compatibility with FSA and Vision BB30 models Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box: Power meter High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Cycling Power Meter G3 L - XTR M9000Ridden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any Shimano MTB drivetrain.Stages Power with Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a Shimano XTR M9000 non-drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Power Meter Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong Bluetooth and ANT+ ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features: Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter Power Range (Watts): 0 to 5000 Cadence range (rpm): 10-220 Water Resistance Rating: IPX7 Weight: Only adds 20g to base crank armCompatibility: Compatible with Shimano Hollowtech II MTB drivetrains Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box: Power meter High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Cycling Power G3 L - Energy BB30Ridden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any FSA or Vision BB30 road drivetrain.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within an FSA Energy BB30 crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features: Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter Power Range (Watts): 0 to 5000 Cadence range (rpm): 10-220 Water Resistance Rating: IPX7 Weight: Only adds 20g to base crank armCompatibility: Across the board compatibility with FSA and Vision BB30 models Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box: Power meter High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Cycling Power G3 L - Energy BB30Ridden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any FSA or Vision BB30 road drivetrain.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within an FSA Energy BB30 crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features: Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter Power Range (Watts): 0 to 5000 Cadence range (rpm): 10-220 Water Resistance Rating: IPX7 Weight: Only adds 20g to base crank armCompatibility: Across the board compatibility with FSA and Vision BB30 models Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box: Power meter High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Cycling Power R G3 cw Chainrings Dura-Ace R9100Ridden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This right-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any Shimano road drivetrain. Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a Dura-Ace 9100 drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour. Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that's never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data. Strong Connection Other improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strengthBattery Life: 200+ hours (coin cell: CR2032) when used as a single sided meterPower Range (Watts): 0 to 5000Cadence Range (rpm): 10-220Water Resistance Rating: IPX7Weight: Only adds 20g to base crank armCompatibility: Compatible with all Shimano Hollowtech II road drivetrains Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box: • Power meter (Right side power only) High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Cycling Power R G3 cw Chainrings Dura-Ace R9100Ridden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This right-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any Shimano road drivetrain. Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a Dura-Ace 9100 drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour. Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that's never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data. Strong Connection Other improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strengthBattery Life: 200+ hours (coin cell: CR2032) when used as a single sided meterPower Range (Watts): 0 to 5000Cadence Range (rpm): 10-220Water Resistance Rating: IPX7Weight: Only adds 20g to base crank armCompatibility: Compatible with all Shimano Hollowtech II road drivetrains Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box: • Power meter (Right side power only) High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Cycling Power R G3 cw Chainrings Dura-Ace R9100Ridden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This right-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any Shimano road drivetrain. Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a Dura-Ace 9100 drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour. Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that's never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data. Strong Connection Other improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strengthBattery Life: 200+ hours (coin cell: CR2032) when used as a single sided meterPower Range (Watts): 0 to 5000Cadence Range (rpm): 10-220Water Resistance Rating: IPX7Weight: Only adds 20g to base crank armCompatibility: Compatible with all Shimano Hollowtech II road drivetrains Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box: • Power meter (Right side power only) High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Cycling Power R G3 cw Chainrings Dura-Ace R9100Ridden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This right-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any Shimano road drivetrain. Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a Dura-Ace 9100 drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour. Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that's never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data. Strong Connection Other improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strengthBattery Life: 200+ hours (coin cell: CR2032) when used as a single sided meterPower Range (Watts): 0 to 5000Cadence Range (rpm): 10-220Water Resistance Rating: IPX7Weight: Only adds 20g to base crank armCompatibility: Compatible with all Shimano Hollowtech II road drivetrains Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box: • Power meter (Right side power only) High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Cycling Power R G3 cw Chainrings Dura-Ace R9100Ridden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This right-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any Shimano road drivetrain. Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a Dura-Ace 9100 drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour. Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that's never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data. Strong Connection Other improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strengthBattery Life: 200+ hours (coin cell: CR2032) when used as a single sided meterPower Range (Watts): 0 to 5000Cadence Range (rpm): 10-220Water Resistance Rating: IPX7Weight: Only adds 20g to base crank armCompatibility: Compatible with all Shimano Hollowtech II road drivetrains Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box: • Power meter (Right side power only) High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Cycling Power R G3 cw Chainrings Dura-Ace R9100Ridden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This right-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any Shimano road drivetrain. Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a Dura-Ace 9100 drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour. Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that's never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data. Strong Connection Other improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strengthBattery Life: 200+ hours (coin cell: CR2032) when used as a single sided meterPower Range (Watts): 0 to 5000Cadence Range (rpm): 10-220Water Resistance Rating: IPX7Weight: Only adds 20g to base crank armCompatibility: Compatible with all Shimano Hollowtech II road drivetrains Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box: • Power meter (Right side power only) High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Cycling Power R G3 cw Chainrings Dura-Ace R9100Ridden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This right-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any Shimano road drivetrain. Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a Dura-Ace 9100 drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour. Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that's never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data. Strong Connection Other improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strengthBattery Life: 200+ hours (coin cell: CR2032) when used as a single sided meterPower Range (Watts): 0 to 5000Cadence Range (rpm): 10-220Water Resistance Rating: IPX7Weight: Only adds 20g to base crank armCompatibility: Compatible with all Shimano Hollowtech II road drivetrains Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box: • Power meter (Right side power only) High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Cycling Power R G3 cw Chainrings Dura-Ace R9100Ridden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This right-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any Shimano road drivetrain. Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a Dura-Ace 9100 drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour. Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that's never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data. Strong Connection Other improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strengthBattery Life: 200+ hours (coin cell: CR2032) when used as a single sided meterPower Range (Watts): 0 to 5000Cadence Range (rpm): 10-220Water Resistance Rating: IPX7Weight: Only adds 20g to base crank armCompatibility: Compatible with all Shimano Hollowtech II road drivetrains Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box: • Power meter (Right side power only) High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Cycling Power R G3 cw Chainrings Dura-Ace R9100Ridden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This right-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any Shimano road drivetrain. Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a Dura-Ace 9100 drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour. Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that's never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data. Strong Connection Other improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strengthBattery Life: 200+ hours (coin cell: CR2032) when used as a single sided meterPower Range (Watts): 0 to 5000Cadence Range (rpm): 10-220Water Resistance Rating: IPX7Weight: Only adds 20g to base crank armCompatibility: Compatible with all Shimano Hollowtech II road drivetrains Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box: • Power meter (Right side power only) High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Cycling Power R G3 cw Chainrings Ultegra R8000Ridden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This right-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any Shimano road drivetrain. Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within an Ultegra R8000 drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour. Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that's never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data. Strong Connection Other improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strengthBattery Life: 200+ hours (coin cell: CR2032) when used as a single sided meterPower Range (Watts): 0 to 5000Cadence Range (rpm): 10-220Water Resistance Rating: IPX7Weight: Only adds 20g to base crank armCompatibility: Compatible with all Shimano Hollowtech II road drivetrains Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box: • Power meter (Right side power only) High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Cycling Power R G3 cw Chainrings Ultegra R8000Ridden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This right-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any Shimano road drivetrain. Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within an Ultegra R8000 drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour. Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that's never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data. Strong Connection Other improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strengthBattery Life: 200+ hours (coin cell: CR2032) when used as a single sided meterPower Range (Watts): 0 to 5000Cadence Range (rpm): 10-220Water Resistance Rating: IPX7Weight: Only adds 20g to base crank armCompatibility: Compatible with all Shimano Hollowtech II road drivetrains Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box: • Power meter (Right side power only) High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Cycling Power R G3 cw Chainrings Ultegra R8000Ridden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This right-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any Shimano road drivetrain. Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within an Ultegra R8000 drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour. Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that's never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data. Strong Connection Other improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strengthBattery Life: 200+ hours (coin cell: CR2032) when used as a single sided meterPower Range (Watts): 0 to 5000Cadence Range (rpm): 10-220Water Resistance Rating: IPX7Weight: Only adds 20g to base crank armCompatibility: Compatible with all Shimano Hollowtech II road drivetrains Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box: • Power meter (Right side power only) High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Cycling Power R G3 cw Chainrings Ultegra R8000Ridden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This right-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any Shimano road drivetrain. Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within an Ultegra R8000 drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour. Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that's never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data. Strong Connection Other improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strengthBattery Life: 200+ hours (coin cell: CR2032) when used as a single sided meterPower Range (Watts): 0 to 5000Cadence Range (rpm): 10-220Water Resistance Rating: IPX7Weight: Only adds 20g to base crank armCompatibility: Compatible with all Shimano Hollowtech II road drivetrains Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box: • Power meter (Right side power only) High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Cycling Power R G3 cw Chainrings Ultegra R8000Ridden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This right-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any Shimano road drivetrain. Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within an Ultegra R8000 drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour. Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that's never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data. Strong Connection Other improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strengthBattery Life: 200+ hours (coin cell: CR2032) when used as a single sided meterPower Range (Watts): 0 to 5000Cadence Range (rpm): 10-220Water Resistance Rating: IPX7Weight: Only adds 20g to base crank armCompatibility: Compatible with all Shimano Hollowtech II road drivetrains Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box: • Power meter (Right side power only) High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Cycling Power R G3 cw Chainrings Ultegra R8000Ridden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This right-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any Shimano road drivetrain. Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within an Ultegra R8000 drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour. Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that's never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data. Strong Connection Other improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strengthBattery Life: 200+ hours (coin cell: CR2032) when used as a single sided meterPower Range (Watts): 0 to 5000Cadence Range (rpm): 10-220Water Resistance Rating: IPX7Weight: Only adds 20g to base crank armCompatibility: Compatible with all Shimano Hollowtech II road drivetrains Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box: • Power meter (Right side power only) High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Cycling Power R G3 cw Chainrings Ultegra R8000Ridden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This right-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any Shimano road drivetrain. Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within an Ultegra R8000 drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour. Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that's never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data. Strong Connection Other improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strengthBattery Life: 200+ hours (coin cell: CR2032) when used as a single sided meterPower Range (Watts): 0 to 5000Cadence Range (rpm): 10-220Water Resistance Rating: IPX7Weight: Only adds 20g to base crank armCompatibility: Compatible with all Shimano Hollowtech II road drivetrains Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box: • Power meter (Right side power only) High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Cycling Power R G3 cw Chainrings Ultegra R8000Ridden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This right-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any Shimano road drivetrain. Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within an Ultegra R8000 drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour. Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that's never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data. Strong Connection Other improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strengthBattery Life: 200+ hours (coin cell: CR2032) when used as a single sided meterPower Range (Watts): 0 to 5000Cadence Range (rpm): 10-220Water Resistance Rating: IPX7Weight: Only adds 20g to base crank armCompatibility: Compatible with all Shimano Hollowtech II road drivetrains Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box: • Power meter (Right side power only) High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Cycling Power R G3 cw Chainrings Ultegra R8000Ridden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This right-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any Shimano road drivetrain. Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within an Ultegra R8000 drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour. Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that's never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data. Strong Connection Other improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strengthBattery Life: 200+ hours (coin cell: CR2032) when used as a single sided meterPower Range (Watts): 0 to 5000Cadence Range (rpm): 10-220Water Resistance Rating: IPX7Weight: Only adds 20g to base crank armCompatibility: Compatible with all Shimano Hollowtech II road drivetrains Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box: • Power meter (Right side power only) High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Cycling Power G3 L - Stages Carbon GXP RoadRidden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any SRAM road drivetrain.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a SRAM Road GXP non-drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features: Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter Power Range (Watts): 0 to 5000 Cadence range (rpm): 10-220 Water Resistance Rating: IPX7 Weight: Only adds 20g to base crank armCompatibility: Compatible with all SRAM GXP road drivetrains Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box: Power meter High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Cycling Power G3 L - Stages Carbon GXP RoadRidden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any SRAM road drivetrain.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a SRAM Road GXP non-drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features: Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter Power Range (Watts): 0 to 5000 Cadence range (rpm): 10-220 Water Resistance Rating: IPX7 Weight: Only adds 20g to base crank armCompatibility: Compatible with all SRAM GXP road drivetrains Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box: Power meter High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Cycling Power G3 L - Stages Carbon GXP RoadRidden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any SRAM road drivetrain.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a SRAM Road GXP non-drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features: Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter Power Range (Watts): 0 to 5000 Cadence range (rpm): 10-220 Water Resistance Rating: IPX7 Weight: Only adds 20g to base crank armCompatibility: Compatible with all SRAM GXP road drivetrains Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box: Power meter High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Cycling Power G3 L - Stages Carbon GXP MTBRidden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any SRAM MTB drivetrain.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a SRAM Mountain Bike GXP non-drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features: Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter Power Range (Watts): 0 to 5000 Cadence range (rpm): 10-220 Water Resistance Rating: IPX7 Weight: Only adds 20g to base crank armCompatibility: Compatible with all SRAM GXP Mountain Bike drivetrains Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box: Power meter High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Cycling Power G3 L - Stages Carbon GXP MTBRidden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any SRAM MTB drivetrain.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a SRAM Mountain Bike GXP non-drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features: Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter Power Range (Watts): 0 to 5000 Cadence range (rpm): 10-220 Water Resistance Rating: IPX7 Weight: Only adds 20g to base crank armCompatibility: Compatible with all SRAM GXP Mountain Bike drivetrains Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box: Power meter High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Power Meter G3 L - Dura-Ace 9100Ridden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any Shimano road drivetrain.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a Dura-Ace 9100 non-drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features: Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter Power Range (Watts): 0 to 5000 Cadence range (rpm): 10-220 Water Resistance Rating: IPX7 Weight: Only adds 20g to base crank armCompatibility: Compatible with all Shimano Hollowtech II road drivetrains Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box: Power meter High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Power Meter G3 L - Dura-Ace 9100Ridden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any Shimano road drivetrain.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a Dura-Ace 9100 non-drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features: Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter Power Range (Watts): 0 to 5000 Cadence range (rpm): 10-220 Water Resistance Rating: IPX7 Weight: Only adds 20g to base crank armCompatibility: Compatible with all Shimano Hollowtech II road drivetrains Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box: Power meter High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Power Meter G3 L - Dura-Ace 9100Ridden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any Shimano road drivetrain.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a Dura-Ace 9100 non-drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features: Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter Power Range (Watts): 0 to 5000 Cadence range (rpm): 10-220 Water Resistance Rating: IPX7 Weight: Only adds 20g to base crank armCompatibility: Compatible with all Shimano Hollowtech II road drivetrains Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box: Power meter High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Cycling Power Meter G3 Dura-Ace R9100 LRRidden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This dual-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any Shimano road drivetrain.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This model is assembled within Shimano's top-of-the-line Dura-Ace R9100 crankset and measures the individual power output of each leg. Also, each Stages power meter gets individually calibrated to ensure an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that's never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter Power Range (Watts): 0 to 5000 Cadence range (rpm): 10-220 Water Resistance Rating: IPX7Weight: Only adds 20g to base crank armCompatibility: Compatible with all Shimano Hollowtech II road drivetrains Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box: Power meter High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Cycling Power Meter G3 Dura-Ace R9100 LRRidden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This dual-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any Shimano road drivetrain.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This model is assembled within Shimano's top-of-the-line Dura-Ace R9100 crankset and measures the individual power output of each leg. Also, each Stages power meter gets individually calibrated to ensure an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that's never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter Power Range (Watts): 0 to 5000 Cadence range (rpm): 10-220 Water Resistance Rating: IPX7Weight: Only adds 20g to base crank armCompatibility: Compatible with all Shimano Hollowtech II road drivetrains Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box: Power meter High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Cycling Power Meter G3 Dura-Ace R9100 LRRidden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This dual-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any Shimano road drivetrain.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This model is assembled within Shimano's top-of-the-line Dura-Ace R9100 crankset and measures the individual power output of each leg. Also, each Stages power meter gets individually calibrated to ensure an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that's never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter Power Range (Watts): 0 to 5000 Cadence range (rpm): 10-220 Water Resistance Rating: IPX7Weight: Only adds 20g to base crank armCompatibility: Compatible with all Shimano Hollowtech II road drivetrains Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box: Power meter High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Cycling Power Meter G3 Dura-Ace R9100 LRRidden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This dual-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any Shimano road drivetrain.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This model is assembled within Shimano's top-of-the-line Dura-Ace R9100 crankset and measures the individual power output of each leg. Also, each Stages power meter gets individually calibrated to ensure an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that's never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter Power Range (Watts): 0 to 5000 Cadence range (rpm): 10-220 Water Resistance Rating: IPX7Weight: Only adds 20g to base crank armCompatibility: Compatible with all Shimano Hollowtech II road drivetrains Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box: Power meter High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Cycling Power Meter G3 Dura-Ace R9100 LRRidden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This dual-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any Shimano road drivetrain.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This model is assembled within Shimano's top-of-the-line Dura-Ace R9100 crankset and measures the individual power output of each leg. Also, each Stages power meter gets individually calibrated to ensure an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that's never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter Power Range (Watts): 0 to 5000 Cadence range (rpm): 10-220 Water Resistance Rating: IPX7Weight: Only adds 20g to base crank armCompatibility: Compatible with all Shimano Hollowtech II road drivetrains Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box: Power meter High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Cycling Power Meter G3 Dura-Ace R9100 LRRidden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This dual-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any Shimano road drivetrain.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This model is assembled within Shimano's top-of-the-line Dura-Ace R9100 crankset and measures the individual power output of each leg. Also, each Stages power meter gets individually calibrated to ensure an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that's never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter Power Range (Watts): 0 to 5000 Cadence range (rpm): 10-220 Water Resistance Rating: IPX7Weight: Only adds 20g to base crank armCompatibility: Compatible with all Shimano Hollowtech II road drivetrains Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box: Power meter High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Cycling Power Meter G3 Dura-Ace R9100 LRRidden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This dual-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any Shimano road drivetrain.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This model is assembled within Shimano's top-of-the-line Dura-Ace R9100 crankset and measures the individual power output of each leg. Also, each Stages power meter gets individually calibrated to ensure an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that's never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter Power Range (Watts): 0 to 5000 Cadence range (rpm): 10-220 Water Resistance Rating: IPX7Weight: Only adds 20g to base crank armCompatibility: Compatible with all Shimano Hollowtech II road drivetrains Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box: Power meter High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Cycling Power Meter G3 Dura-Ace R9100 LRRidden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This dual-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with any Shimano road drivetrain.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This model is assembled within Shimano's top-of-the-line Dura-Ace R9100 crankset and measures the individual power output of each leg. Also, each Stages power meter gets individually calibrated to ensure an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that's never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter Power Range (Watts): 0 to 5000 Cadence range (rpm): 10-220 Water Resistance Rating: IPX7Weight: Only adds 20g to base crank armCompatibility: Compatible with all Shimano Hollowtech II road drivetrains Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box: Power meter High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Cycling Power Meter G3 L - Cannondale Si HGRidden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with Cannondale Hollowgram chainsets from 2014 onwards.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a Cannondale Hollowgram Si non-drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features: Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter Power Range (Watts): 0 to 5000 Cadence range (rpm): 10-220 Water Resistance Rating: IPX7 Weight: Only adds 20g to base crank armCompatibility: Compatible with existing Cannondale Hollowgram Si crank models - 2014 or newer and Hollowgram SiSL2 cranks Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box: Power meter High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Cycling Power Meter G3 L - Cannondale Si HGRidden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with Cannondale Hollowgram chainsets from 2014 onwards.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a Cannondale Hollowgram Si non-drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features: Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter Power Range (Watts): 0 to 5000 Cadence range (rpm): 10-220 Water Resistance Rating: IPX7 Weight: Only adds 20g to base crank armCompatibility: Compatible with existing Cannondale Hollowgram Si crank models - 2014 or newer and Hollowgram SiSL2 cranks Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box: Power meter High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Cycling Power Meter G3 L - Cannondale Si HGRidden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and can be used with Cannondale Hollowgram chainsets from 2014 onwards.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a Cannondale Hollowgram Si non-drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features: Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter Power Range (Watts): 0 to 5000 Cadence range (rpm): 10-220 Water Resistance Rating: IPX7 Weight: Only adds 20g to base crank armCompatibility: Compatible with existing Cannondale Hollowgram Si crank models - 2014 or newer and Hollowgram SiSL2 cranks Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box: Power meter High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Cycling Power Meter G3 L Campagnolo Super RecordRidden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and is specifcally designed for use with a Campagnolo Super Record road drivetrain.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a Campagnolo Super Record non-drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features: Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter Power Range (Watts): 0 to 5000 Cadence range (rpm): 10-220 Water Resistance Rating: IPX7 Weight: Only adds 20g to base crank armCompatibility: Only meant for use along with a drive side Campagnolo Super Record crank arm Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box: Power meter High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Cycling Power Meter G3 L Campagnolo Super RecordRidden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and is specifcally designed for use with a Campagnolo Super Record road drivetrain.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a Campagnolo Super Record non-drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features: Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter Power Range (Watts): 0 to 5000 Cadence range (rpm): 10-220 Water Resistance Rating: IPX7 Weight: Only adds 20g to base crank armCompatibility: Only meant for use along with a drive side Campagnolo Super Record crank arm Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box: Power meter High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Cycling Power Meter G3 L - Campagnolo RecordRidden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and is designed for use with a Campagnolo Record or Chorus road drivetrain.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a Campagnolo Record non-drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features: Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter Power Range (Watts): 0 to 5000 Cadence range (rpm): 10-220 Water Resistance Rating: IPX7 Weight: Only adds 20g to base crank armCompatibility: Only meant for use with a drive side Campagnolo Record or Chorus crank arm. It will NOT fit Campagnolo Super Record cranksets Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box: Power meter High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Cycling Power Meter G3 L - Campagnolo RecordRidden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and is designed for use with a Campagnolo Record or Chorus road drivetrain.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a Campagnolo Record non-drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features: Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter Power Range (Watts): 0 to 5000 Cadence range (rpm): 10-220 Water Resistance Rating: IPX7 Weight: Only adds 20g to base crank armCompatibility: Only meant for use with a drive side Campagnolo Record or Chorus crank arm. It will NOT fit Campagnolo Super Record cranksets Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box: Power meter High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Cycling Power Meter G3 L - Campagnolo ChorusRidden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and is designed for use with a Campagnolo Chorus or Record road drivetrain.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a Campagnolo Chorus non-drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features: Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter Power Range (Watts): 0 to 5000 Cadence range (rpm): 10-220 Water Resistance Rating: IPX7 Weight: Only adds 20g to base crank armCompatibility: Designed for use with along with a drive side Campagnolo Chorus or Record crank arm. It will not fit Campagnolo Super Record cranksets Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box: Power meter High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Cycling Power Meter G3 L - Campagnolo ChorusRidden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and is designed for use with a Campagnolo Chorus or Record road drivetrain.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a Campagnolo Chorus non-drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features: Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter Power Range (Watts): 0 to 5000 Cadence range (rpm): 10-220 Water Resistance Rating: IPX7 Weight: Only adds 20g to base crank armCompatibility: Designed for use with along with a drive side Campagnolo Chorus or Record crank arm. It will not fit Campagnolo Super Record cranksets Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box: Power meter High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Cycling Power Meter G3 L - Campagnolo ChorusRidden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and is designed for use with a Campagnolo Chorus or Record road drivetrain.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a Campagnolo Chorus non-drive side crank arm and is individually calibrated. This ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features: Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter Power Range (Watts): 0 to 5000 Cadence range (rpm): 10-220 Water Resistance Rating: IPX7 Weight: Only adds 20g to base crank armCompatibility: Designed for use with along with a drive side Campagnolo Chorus or Record crank arm. It will not fit Campagnolo Super Record cranksets Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersIn The Box: Power meter High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Power Meter G3 L - Stages Carbon BB30Ridden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and fits 30mm SRAM, Race Face Next SL, Easton & FSA 386EVO cranksets by way of appropriate Stages 30mm alloy spindles.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a non-drive-side Stages Carbon crank arm and built to retrofit SRAM, Race Face, and Easton cranks with Stages Power, with an additional spindle purchase. No additional spindle purchase is required for FSA 386EVO cranks. The crank arm is also individually calibrated, which ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features: Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter Power Range (Watts): 0 to 5000 Cadence range (rpm): 10-220 Water Resistance Rating: IPX7 Weight: Only adds 20g to base crank armCompatibility: Fits 30mm spindle BB30, OSBB and 386EVO bottom bracket standards by way of appropriate Stages 30mm alloy spindles (sold seperately) Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersStages Cycling spindles for 30mm are available in five options to purchase seperately: For SRAM Red 22 BB30 For SRAM Force 22, Rival 22, Force/Rival CX1 For 2015 model/year or newer SRAM BB30 mountain cranks with a 9mm driveside spacer For 2015 model/year or newer SRAM BB30 mountain cranks with a 15.5mm driveside spacerRace Face Next SLIn The Box: Power meter High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Power Meter G3 L - Stages Carbon BB30Ridden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and fits 30mm SRAM, Race Face Next SL, Easton & FSA 386EVO cranksets by way of appropriate Stages 30mm alloy spindles.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a non-drive-side Stages Carbon crank arm and built to retrofit SRAM, Race Face, and Easton cranks with Stages Power, with an additional spindle purchase. No additional spindle purchase is required for FSA 386EVO cranks. The crank arm is also individually calibrated, which ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features: Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter Power Range (Watts): 0 to 5000 Cadence range (rpm): 10-220 Water Resistance Rating: IPX7 Weight: Only adds 20g to base crank armCompatibility: Fits 30mm spindle BB30, OSBB and 386EVO bottom bracket standards by way of appropriate Stages 30mm alloy spindles (sold seperately) Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersStages Cycling spindles for 30mm are available in five options to purchase seperately: For SRAM Red 22 BB30 For SRAM Force 22, Rival 22, Force/Rival CX1 For 2015 model/year or newer SRAM BB30 mountain cranks with a 9mm driveside spacer For 2015 model/year or newer SRAM BB30 mountain cranks with a 15.5mm driveside spacerRace Face Next SLIn The Box: Power meter High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stages Power Meter G3 L - Stages Carbon BB30Ridden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and fits 30mm SRAM, Race Face Next SL, Easton & FSA 386EVO cranksets by way of appropriate Stages 30mm alloy spindles.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a non-drive-side Stages Carbon crank arm and built to retrofit SRAM, Race Face, and Easton cranks with Stages Power, with an additional spindle purchase. No additional spindle purchase is required for FSA 386EVO cranks. The crank arm is also individually calibrated, which ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features: Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level Updated accelerometer and addition of gyroscope Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter Power Range (Watts): 0 to 5000 Cadence range (rpm): 10-220 Water Resistance Rating: IPX7 Weight: Only adds 20g to base crank armCompatibility: Fits 30mm spindle BB30, OSBB and 386EVO bottom bracket standards by way of appropriate Stages 30mm alloy spindles (sold seperately) Frame Compatibility: Most frames Device Compatibility: ANT+, Bluetooth Smart ready Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersStages Cycling spindles for 30mm are available in five options to purchase seperately: For SRAM Red 22 BB30 For SRAM Force 22, Rival 22, Force/Rival CX1 For 2015 model/year or newer SRAM BB30 mountain cranks with a 9mm driveside spacer For 2015 model/year or newer SRAM BB30 mountain cranks with a 15.5mm driveside spacerRace Face Next SLIn The Box: Power meter High-quality CR2032 coin cell battery Product identification card with serial number and ANT+ I.D. Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.